Pro-Vision PVDL-202TAC 20W Dimmable LED Downlight 3CCT 150-160mm

Description

Big-room brightness. Three colours. One 20W SKU.

The Pro-Vision PVDL-202TAC is a 20W tri-colour LED downlight with full-range dimming and an internal driver, built for the larger spaces where a smaller fitting simply can't put enough light on the floor. Delivering up to 1900 lumens across three selectable colour temperatures and dimmable from 10 to 100 percent, it lights open-plan living, big kitchens and commercial rooms from a single part number — with the colour and brightness set to suit the space.

Key Features

• 20W power draw, up to 1900 lumens output
• Fully dimmable, 10-100% range
• 3CCT selectable: 3000K / 4000K / 6000K
• Adjustable 150-160mm cut-out range
• Internal driver — no separate driver box
• IP44 rated
• 2835 SMD LED, 120° beam angle
• CRI >80, Power Factor ≥0.9
• Input AC 200-240V, 50/60Hz
• Fixture Ø188mm × 68mm high
• >50,000 hour rated lifespan, 3-year warranty

Secure yours today for fast dispatch Australia-wide.

Why the 20W Output Earns Its Place

Larger rooms need more light on the floor, and a downlight that runs out of output just means more fittings, more holes and more wiring to cover the same area. The PVDL-202TAC delivers up to 1900 lumens from a single fitting, so open-plan living areas, large kitchens and commercial spaces can be lit with fewer points. The internal driver means there is no separate driver box to find room for above the ceiling line — one less component to position when the space above the plasterboard is tight or busy with insulation, joists and ducting, which also makes for a faster, tidier install. The 120-degree beam angle spreads that output broadly across the room rather than throwing a narrow spot, and a power factor of 0.9 or better keeps the fitting running efficiently on the circuit.

Full-Range Dimming and Three Colours from One Fitting

Two features do the heavy lifting here. The fitting dims across a 10 to 100 percent range, so the same downlight can run at full brightness for tasks and wind right down for evenings and ambient scenes — giving one product control over the mood of a room rather than a fixed output. The selectable 3CCT switch then sets warm 3000K, neutral 4000K or cool 6000K at the point of install. Warm 3000K suits living areas and bedrooms, neutral 4000K works well in kitchens and hallways, and cool 6000K gives a crisp, task-focused light. One part number on the van therefore covers a whole range of rooms and preferences — no separate SKUs to stock, no wrong colour temperature turning up on site. For a similar output in an Australian brand, the SAL Premier S9074TC downlight range sits alongside this fitting.

Built for the Large Aperture and Everyday Service

The adjustable 150-160mm cut-out range means the fitting drops into any opening across that 10mm span rather than committing to a single fixed aperture, which gives some tolerance on the ceiling hole and can suit a retrofit into an existing larger opening. A rated life beyond 50,000 hours means the PVDL-202TAC is designed to keep going with minimal maintenance — fewer change-outs over the life of the installation, which matters as much in a rental portfolio or commercial fit-out as it does at home. A CRI above 80 renders colours accurately for everyday residential and commercial spaces, and the IP44 ingress rating means the fitting is protected against solid objects and against water splashing from any direction, suiting it to areas that see some moisture in normal use. Backed by a 3-year warranty.

Q: Is the Pro-Vision PVDL-202TAC dimmable, and across what range?
A: Yes. It dims across a 10 to 100 percent range, so it can run at full brightness for tasks or wind down for ambient lighting. Use a compatible LED dimmer and check the dimmer's load rating.

Q: What size ceiling hole does the PVDL-202TAC fit?
A: It has an adjustable cut-out range of 150 to 160mm, so it fits any ceiling opening within that span. The overall fixture diameter is 188mm.

Q: Can I change the colour temperature of this downlight?
A: Yes. A 3CCT selector lets you choose between 3000K (warm white), 4000K (neutral white) and 6000K (cool white), set at the point of installation so one fitting can suit different rooms.