Pro-Vision PVDL-1000TAC Super Slim 10W LED Downlight 3CCT

Description

Super slim downlight. Three colours. One low-profile SKU.

The Pro-Vision PVDL-1000TAC is a 10W tri-colour LED downlight built around one problem installers keep running into: getting a clean, bright recessed light into a ceiling that simply doesn't have the depth for a conventional fitting. At just 26mm body height with the driver built in, and up to 950 lumens across three selectable colour temperatures, it delivers modern downlight performance from a profile slim enough for shallow cavities, tight plenums and retrofit jobs.

Key Features

• 10W power draw, up to 950 lumens output
• 3CCT selectable: 3000K / 4000K / 6000K
• Super slim 26mm body height
• Adjustable 90-110mm cut-out range
• Internal driver — no separate driver box
• IP44 rated
• 2835 SMD LED, 120° beam angle
• CRI >83, Power Factor ≥0.9
• Input AC 200-240V, 50/60Hz
• >50,000 hour rated lifespan, 3-year warranty

Order online now for fast dispatch Australia-wide.

Why the Slim Profile Is the Whole Point

The 26mm body height is what sets this fitting apart from a standard downlight. Renovations, retrofits and older buildings routinely present ceiling cavities that were never designed for modern fittings, and a deeper luminaire simply won't sit in the space available. At 26mm, the PVDL-1000TAC gives installers room to work in shallow plenums where clearance is tight. Because the driver is built into the body rather than tethered as a separate box, there is one less component to find room for above the ceiling line — a real advantage when the space above the plasterboard is crowded with insulation, joists or ducting, or simply isn't very deep to begin with. Fewer parts above the ceiling also means a faster, tidier install.

One Cut-Out Range, Three Light Colours, One Van SKU

Two features do the heavy lifting here. The adjustable 90-110mm cut-out range means the fitting drops into any opening across that 20mm span rather than committing to a single fixed aperture. On a retrofit that often lets it reuse the hole left by an older downlight with no patching, re-cutting or resizing — saving time on the job and avoiding cosmetic ceiling repair. The selectable 3CCT switch then lets you set warm 3000K, neutral 4000K or cool 6000K at the point of install. Warm 3000K suits living areas and bedrooms, neutral 4000K works well in kitchens and hallways, and cool 6000K gives a crisp, task-focused light. One part number on the van therefore covers a whole range of rooms and preferences — no separate SKUs to stock, no wrong colour temperature turning up on site. For a comparable 10W tri-colour option in an Australian brand, the SAL ECOGEM downlight range sits alongside this fitting.

Built for Everyday Service and Some Moisture

A rated life beyond 50,000 hours means the PVDL-1000TAC is designed to keep going with minimal maintenance — fewer change-outs over the life of the installation, which matters as much in a rental portfolio or commercial fit-out as it does at home. A CRI above 83 renders colours accurately and naturally under the light, so spaces look the way they should rather than washed-out or flat. The IP44 ingress rating means the fitting is protected against solid objects and against water splashing from any direction, which suits it to areas that see some moisture in normal use. The 2835 SMD LED and 120-degree beam angle spread light evenly across the space rather than throwing a narrow spot, and a power factor of 0.9 or better keeps the fitting running efficiently on the circuit. Backed by a 3-year warranty.

Q: What size ceiling hole does the Pro-Vision PVDL-1000TAC fit?
A: It has an adjustable cut-out range of 90 to 110mm, so it fits any ceiling opening within that span. On a retrofit this often means it can reuse the existing downlight hole without re-cutting the ceiling.

Q: Can I change the colour temperature of this downlight?
A: Yes. A 3CCT selector lets you choose between 3000K (warm white), 4000K (neutral white) and 6000K (cool white). The colour is set at the point of installation, so a single fitting can suit different rooms.

Q: Does the PVDL-1000TAC need a separate driver, and will it fit a shallow ceiling?
A: No separate driver box is required — the driver is internal to the fitting. Combined with the 26mm body height, that makes it well suited to shallow ceiling cavities where a deeper fitting with a remote driver would not fit.