Pro-Vision PVCL-2801 28W Tri-Colour 3CCT Slim LED Oyster Ceiling Light 320mm IP54 Dimmable White

Description

Three colour temperatures. One ultra-slim fitting.

Stocking a separate oyster for every colour temperature wastes van space and holds up jobs. The Pro-Vision PVCL-2801 puts 3000K, 4000K and 6000K into a single 28W fitting, so one part number covers warm lounge rooms, neutral hallways and daylight laundries.

Key Features

• 28W LED oyster, 2600-2700 lumens
• 3CCT changeable: 3000K, 4000K and 6000K
• Trailing edge dimmable across 5-100 per cent
• Power dimming: 70 per cent or 100 per cent by switch
• IP54 rated against dust and splashing water
• 320mm diameter, only 26mm deep
• Wire-in driver, no external gear to mount
• Polycarbonate housing in white
• CRI over 83 and a 120 degree beam
• Power factor 0.9 or better
• AC 200-240V, 50/60Hz
• Rated life over 30,000 hours
• Backed by a 3 year warranty

Secure yours today for fast dispatch Australia-wide.

Where the PVCL-2801 Earns Its Keep

One fitting, three specifications. Tri-colour selection is the practical win here. Rather than guessing whether a client wants warm or daylight before you leave the wholesaler, you carry the one 28W unit and settle the colour on site. For builders running a full house, that means fewer part numbers on the order, less capital tied up in slow-moving stock, and no half-boxes left over at handover. It also makes remedial work simpler, because matching an existing fitting becomes a selection rather than a fresh purchase and a second trip.

Slim enough for tight ceilings. At 26mm deep the PVCL-2801 sits almost flush, which suits low garage ceilings, stairwell landings and hallway soffits where a traditional deep oyster looks bulky and collects dust on its shoulder. The 320mm diameter throws a broad 120 degree spread, so a single fitting covers a typical bedroom, laundry or entry without running a second point back to the switchboard.

Rated for the damp end of the house. IP54 means the fitting is protected against dust ingress and against splashing water from any direction. That covers laundries, garages, undercover verandahs and carports where condensation, wind-driven spray and workshop dust are part of daily life. Always confirm the fitting suits the specific location and any zone requirements under AS/NZS 3000 before installing.

Dimming without a separate driver. The driver is wire-in, so there is no remote gear tray to find space for above the ceiling and no extra cabling to run during fit-off. Once installed the light dims from 5 to 100 per cent on a trailing edge dimmer, and a power dimming setting lets you run the fitting at 70 per cent or full output by switch. That combination is handy for bedrooms, media rooms and hallways where full brightness is rarely wanted after dark.

Is the Pro-Vision PVCL-2801 dimmable?
Yes. It dims from 5 to 100 per cent using a trailing edge dimmer, and a separate power dimming setting lets you run it at either 70 per cent or 100 per cent output by switch. Check your dimmer is rated for the load and listed as trailing edge before fit-off.

What colour temperatures does the PVCL-2801 offer?
Three are built into the one fitting: 3000K warm white, 4000K cool white and 6000K daylight. Pro-Vision lists the fitting as 3CCT changeable, so a single unit replaces three separate part numbers on your order.

What does the IP54 rating cover on this ceiling light?
IP54 means the luminaire is protected against dust ingress and against splashing water from any direction. It suits sheltered damp areas such as laundries, garages and undercover outdoor spaces rather than open weather exposure like a pergola or an unsheltered eave.