GEN3 CO1PH10 10A Double Pole 3 Pin Flat Switched Socket Outlet IP66 Grey

Description

A double-pole weatherproof socket and switch in one unit.

The GEN3 CO1PH10 double-pole version is a 10A, 3-pin flat switched socket outlet rated 250V and IP66, combining a socket and an integral isolating switch in a single weatherproof unit. Unlike the standard single-pole CO1PH10, the switch on this version breaks both the active and the neutral, fully isolating the outlet at the point of use. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it suits outdoor, industrial and wash-down environments where a switched, weatherproof outlet with full isolation is needed.

Key Features

• 10A, 3-pin flat switched socket outlet, 250V
• Socket and isolating switch combined in one unit
• Double pole switching – breaks both active and neutral
• Full isolation of the outlet at the point of use
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Flat pin configuration (standard Australian)
• Series 56 style
• Surface mount
• Combination unit – approximately 206 × 101 × 110mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Australian/NZ approval or compliance certificates held

Add to cart for fast dispatch across Australia.

Double-Pole Full Isolation

This version of the CO1PH10 switches two poles together, breaking both the active and the neutral when turned off. Compared with a single-pole switched socket, which interrupts only the active, double-pole switching fully isolates the connected equipment, a useful safety feature where complete disconnection is required for maintenance or in higher-risk environments.

Single-Pole or Double-Pole?

The standard CO1PH10 is single-pole, switching the active only. This double-pole version switches both active and neutral. Both combine a 10A socket with an integral switch in the same weatherproof housing; the choice comes down to whether full two-pole isolation is needed at the outlet.

Built for the Outdoors

Rated IP66, the CO1PH10 double-pole version is dust-tight and withstands high-pressure water jets. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: What does double-pole mean on this version of the CO1PH10?
A: The switch breaks both the active and the neutral, fully isolating the outlet, whereas a single-pole switch interrupts only the active.

Q: How is this different from the standard CO1PH10?
A: The switching. This version is double-pole (switches active and neutral); the standard CO1PH10 is single-pole (switches the active only). Both are 10A 3-pin flat IP66 switched socket outlets.

Q: Is the CO1PH10 double-pole version suitable for outdoor use?
A: Yes. It is rated IP66, meaning it is dust-tight and protected against high-pressure water jets, suitable for outdoor and wash-down environments.