GEN3 SCO1PH10 10 Amp 3 Pin Flat Trailing Socket Standard AU Pins

Description

Rugged weatherproof socket, standard flat pins.

The GEN3 SCO1PH10 is a 10A single-phase industrial extension socket with the standard three flat-pin pattern and an IP66 weatherproof body. With a cable gland for quick rewiring, it's the tough female end for building or repairing a standard Australian 10A lead.

Key Features

• 10A single phase, 3 flat pins (standard Australian pattern)
• 250V AC
• IP66 rated — dust-tight and protected against powerful water jets
• Cable gland for quick termination (rewireable)
• Tough orange PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Accepts standard Australian 10A flat-pin plugs

Grab one online today for quick Australia-wide dispatch.

The Female End of the Lead

The SCO1PH10 is the trailing socket that pairs with the GEN3 PL1PH10 plug to make a complete extension lead. It uses the standard Australian flat-pin pattern, so it accepts standard 10A plugs, but in a rugged IP66 weatherproof housing built for the worksite rather than the lounge room.

Built for Australian Conditions

IP66 protection means it is dust-tight and withstands powerful water jets from any direction. A virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper (for lower heat rise) stand up to vibration, moisture and a wide -25°C to +70°C operating range.

Quick to Wire and Replace

A cable gland makes termination fast and secure, so it's a straightforward rewireable replacement socket for a damaged or worn lead. It is interchangeable with other major brands and pairs with the matching GEN3 flat-pin plug and appliance inlet to build or repair a complete lead.

Q: What plug does the GEN3 SCO1PH10 accept?
A: It accepts standard Australian three flat-pin 10A plugs, including the matching GEN3 PL1PH10, in a rugged IP66 weatherproof housing.

Q: Is the GEN3 SCO1PH10 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, suitable for outdoor and industrial use.

Q: Can the GEN3 SCO1PH10 be rewired?
A: Yes. It is a rewireable extension socket with a cable gland for quick, secure termination, and should be wired by a licensed electrician.