CTL25-6 25mm Cable 6mm Stud Tinned Copper Tube Crimp Lugs

Description

16mm Cable. 10mm Stud. Tinned Copper. Compression Crimp Lug. Sold Individually.

The CTL16-10 is a 16mm tinned copper tube compression crimp lug with a 10mm stud hole — used to terminate a 16mm² conductor to a bolted connection point such as a terminal block, earth bar, busbar, or equipment stud. Annealed copper barrel with tin electroplated finish. Sold individually.

• CTL16-10 — 16mm Cable, 10mm Stud Tinned Copper Tube Crimp Lug
• Suits 16mm² conductor — 7/1.70 stranding
• 10mm stud hole — suits M10 bolts and studs
• Annealed copper barrel — tin electroplated finish for corrosion resistance
• Compression crimp barrel — single crimp
• For terminating conductor to terminal block, earth bar, busbar, or bolted connection
• Sold individually

Shop online now — fast dispatch Australia-wide.

Where the CTL16-10 Crimp Lug Is Used

A compression crimp lug terminates a single conductor end to a bolted connection point — the conductor is inserted into the barrel and a compression crimp tool closes the barrel around the conductor, making a permanent, mechanically secure, low-resistance termination. The tongue of the lug is then bolted to the connection point — a terminal block, earth bar, busbar, equipment stud, or similar — using an M10 bolt through the 10mm stud hole.

The CTL16-10 is sized for 16mm² conductor — a heavier cable size used in Australian commercial and industrial electrical installations for sub-main feeds, larger three-phase circuit conductors, main switchboard incoming cables in smaller installations, and high-current single-phase circuits. The 10mm stud hole suits M10 hardware — used on heavy duty busbars, main earth bars, and industrial equipment terminals where a robust mechanical connection is required. The tinned copper construction combines the excellent conductivity of annealed copper with a tin electroplated surface that resists oxidation and maintains a clean, low-resistance contact at the bolted joint over the service life of the installation.

Crimp lugs in this range are available across a wide range of cable sizes and stud hole combinations — covering the full range of conductor sizes and connection hardware used in Australian electrical installations.

Q: What is the difference between CTL16-8 and CTL16-10?
A: Both are 16mm² tinned copper tube crimp lugs with identical barrel and cable specifications. The only difference is the stud hole — CTL16-8 has an 8mm stud hole (suits M8 bolts) and CTL16-10 has a 10mm stud hole (suits M10 bolts). Select the correct size to match the bolt or stud at the connection point.

Q: What stud or bolt size suits the CTL16-10?
A: The CTL16-10 has a 10mm stud hole, suited to M10 bolts and studs — used on heavy duty busbars, main earth bars, and industrial equipment terminals.

Q: Is the CTL16-10 sold individually or in a bag?
A: The CTL16-10 is sold individually.