CTL10-8 10mm Cable 8mm Stud Tinned Copper Tube Crimp Lugs

Description

10mm Cable. 8mm Stud. Tinned Copper. Compression Crimp Lug. Sold Individually.

The CTL10-8 is a 10mm tinned copper tube compression crimp lug with an 8mm stud hole — used to terminate a 10mm² conductor to a bolted connection point such as a terminal block, earth bar, busbar, or equipment stud. Annealed copper barrel with tin electroplated finish. Sold individually.

• CTL10-8 — 10mm Cable, 8mm Stud Tinned Copper Tube Crimp Lug
• Suits 10mm² conductor — 7/1.35 stranding
• 8mm stud hole — suits M8 bolts and studs
• Annealed copper barrel — tin electroplated finish for corrosion resistance
• Compression crimp barrel — single crimp
• For terminating conductor to terminal block, earth bar, busbar, or bolted connection
• Sold individually

Shop online now — fast dispatch Australia-wide.

Where the CTL10-8 Crimp Lug Is Used

A compression crimp lug terminates a single conductor end to a bolted connection point — the conductor is inserted into the barrel and a compression crimp tool closes the barrel around the conductor, making a permanent, mechanically secure, low-resistance termination. The tongue of the lug is then bolted to the connection point — a terminal block, earth bar, busbar, equipment stud, or similar — using an M8 bolt through the 8mm stud hole.

The CTL10-8 is sized for 10mm² conductor — a heavier cable size used in Australian commercial and light industrial electrical installations for sub-board feeds, larger air conditioning and mechanical plant circuits, and main circuit runs where current demand requires a conductor cross-section beyond the standard residential cable sizes. The 8mm stud hole suits M8 hardware — used on larger terminal blocks, heavy duty earth bars, switchboard busbars, and equipment connection points where M6 hardware is insufficient for the mechanical loading. The tinned copper construction combines the excellent conductivity of annealed copper with a tin electroplated surface that resists oxidation and maintains a clean, low-resistance contact at the bolted joint over the service life of the installation.

Crimp lugs in this range are available across a wide range of cable sizes and stud hole combinations — covering the full range of conductor sizes and connection hardware used in Australian electrical installations.

Q: What is the difference between CTL10-6 and CTL10-8?
A: Both are 10mm² tinned copper tube crimp lugs with identical barrel and cable specifications. The only difference is the stud hole — CTL10-6 has a 6mm stud hole (suits M6 bolts) and CTL10-8 has an 8mm stud hole (suits M8 bolts). Select the correct size to match the bolt or stud at the connection point.

Q: What stud or bolt size suits the CTL10-8?
A: The CTL10-8 has an 8mm stud hole, suited to M8 bolts and studs — used on larger terminal blocks, heavy duty earth bars, and switchboard busbars where M6 hardware is insufficient.

Q: Is the CTL10-8 sold individually or in a bag?
A: The CTL10-8 is sold individually.