GEN3 CO1PH10 10A 3 Pin Flat Switched Socket Outlet 250V IP66 Grey

Description

A weatherproof socket and switch combined in one unit.

The GEN3 CO1PH10 is a 10A, 3-pin flat switched socket outlet rated 250V and IP66, combining a socket and an integral isolating switch in a single weatherproof unit. The built-in switch lets the outlet be turned off at the point of use, so connected equipment can be isolated without unplugging or switching at the board. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it suits outdoor, industrial and wash-down environments where a switched, weatherproof outlet is needed.

Key Features

• 10A, 3-pin flat switched socket outlet, 250V
• Socket and isolating switch combined in one unit
• Switch isolates the outlet at the point of use
• Single pole switching
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Flat pin configuration (standard Australian)
• Series 56 style
• Surface mount
• Combination unit – approximately 206 × 101 × 110mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Australian/NZ approval or compliance certificates held

Add to cart for fast dispatch across Australia.

Socket and Switch in One

The CO1PH10 brings together a 10A socket and an isolating switch in a single weatherproof housing. The switch allows the outlet to be turned off locally, providing convenient on-site isolation of connected equipment without needing to unplug or return to the switchboard, a practical safety feature for tools and appliances in exposed locations.

Fixed, Switched or Auto-Switched?

The CO1PH10 is the manually switched option in the GEN3 range: it has a switch you operate by hand. The SC310 is a plain fixed socket with no switch, while the SCA310 switches automatically. Choosing between them depends on whether, and how, you want to isolate the outlet at the point of use.

Built for the Outdoors

Rated IP66, the CO1PH10 is dust-tight and withstands high-pressure water jets. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: What does switched mean on the GEN3 CO1PH10?
A: It has a built-in switch that isolates the socket at the point of use, so connected equipment can be turned off without unplugging or switching at the board.

Q: What is the difference between the CO1PH10, the SC310 and the SCA310?
A: The switching. The CO1PH10 has a manual switch, the SCA310 switches automatically, and the SC310 is a plain fixed socket with no switch. All are 10A 3-pin flat IP66 outlets.

Q: Is the CO1PH10 suitable for outdoor use?
A: Yes. It is rated IP66, meaning it is dust-tight and protected against high-pressure water jets, suitable for outdoor and wash-down environments.