Clipsal 56 Series 56C332-GY Switched Socket Outlet 250V 32A 3 Round Pin IP66 Grey

Description

Maximum 32A round-pin power for heavy industrial loads.

The Clipsal 56C332-GY is an IP66 switched socket outlet rated 250V, 32A with a 3 round pin configuration. Built for surface mounting in the most demanding outdoor and industrial environments, it delivers reliable switched power at the highest single-phase current in the 56 Series socket range through a rugged weatherproof housing.

Key Features

• Rated 250V, 32A, 50Hz
• 3 round pin (1 + Neutral + Earth)
• Single phase
• IP66 weatherproof protection
• Surface mounting
• Screw terminals, 6-16mm² capacity
• Conduit entry 2 x M20 / 1 x M25
• ABS housing, phosphor bronze pins
• Dimensions 204 x 101 x 108mm
• Grey finish
• PVC-free
• Built to AS/NZS 3133 and AS/NZS 3123

Get yours today for fast dispatch Australia-wide.

Why it Matters

Built for harsh conditions
The IP66 rating means the enclosure is fully protected against dust and powerful water jets, so this socket holds up in exposed outdoor locations, washdown areas and dusty industrial sites. The ABS housing operates reliably across an ambient range of -25 to 75°C, making it a dependable choice where standard power points would not survive. Phosphor bronze pins provide durable, low-resistance contact for a long service life, and the integrated switch means each outlet can be isolated locally.

Maximum 32A capacity with round pins
Rated at 32A, this is the highest-current single-phase socket in the 56 Series range, matched to the largest machinery and high-draw industrial equipment. The 3 round pin format is a distinct configuration that prevents accidental interchange with lower-rated plugs. The heavier 6-16mm² screw terminals accept the larger conductors a 32A circuit demands, and the 2 x M20 / 1 x M25 conduit entries give flexible cable routing. At 204mm high by 101mm wide and 108mm deep, it provides the depth needed for the high-current mechanism and terminals.

Australian-standard power
Manufactured to AS/NZS 3133 and AS/NZS 3123, this 56 Series outlet meets Australian requirements for weatherproof socket outlets. The 3 round pin format accepts standard Australian 32A round-pin plugs, and the grey housing is a familiar sight across industrial, utility and commercial installations. As a mains-connected device, it should be installed by a licensed electrician to meet the wiring rules.

What current is the Clipsal 56C332-GY rated for?
It is rated 32A at 250V, the highest single-phase current in the 56 Series switched socket range.

Is it suitable for outdoor use?
Yes. It carries an IP66 rating, protecting it against dust and high-pressure water jets for exposed outdoor and washdown areas.

What plugs does it accept?
It has a 3 round pin configuration (active, neutral and earth) that accepts standard Australian 32A round-pin plugs.