GEN3 CO1PH20F 20A 3 Pin Flat Switched Socket Outlet 250V IP66 Grey

Description

A 20A weatherproof socket and switch combined in one unit.

The GEN3 CO1PH20F is a 20A, 3-pin flat switched socket outlet rated 250V and IP66, combining a socket and an integral isolating switch in a single weatherproof unit. The built-in switch lets the outlet be turned off at the point of use, so connected equipment can be isolated without unplugging or switching at the board. At 20A it suits higher-current single-phase equipment than the 10A and 15A versions, and its flat-pin configuration is the standard Australian 20A pattern. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it suits outdoor, industrial and wash-down environments where a switched, weatherproof outlet is needed.

Key Features

• 20A, 3-pin flat switched socket outlet, 250V
• Socket and isolating switch combined in one unit
• Switch isolates the outlet at the point of use
• Single pole switching
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Flat pin configuration (standard Australian, 20A)
• Series 56 style
• Surface mount
• Combination unit – approximately 206 × 101 × 110mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Australian/NZ approval or compliance certificates held

Get yours online for fast dispatch across Australia.

Socket and Switch in One

The CO1PH20F brings together a 20A socket and an isolating switch in a single weatherproof housing. The switch allows the outlet to be turned off locally, providing convenient on-site isolation of connected equipment without needing to unplug or return to the switchboard, a practical safety feature for tools and appliances in exposed locations.

Flat Pin or Round Pin?

The CO1PH20F is the flat-pin 20A switched socket, accepting standard Australian 20A flat-pin plugs. GEN3 also offers the CO1PHR320, a round-pin version of the same 20A switched socket. Choose the flat-pin CO1PH20F for standard 20A plugs, or the round-pin version where round-pin keying is required.

Built for the Outdoors

Rated IP66, the CO1PH20F is dust-tight and withstands high-pressure water jets. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: What does switched mean on the GEN3 CO1PH20F?
A: It has a built-in switch that isolates the socket at the point of use, so connected equipment can be turned off without unplugging or switching at the board.

Q: What is the difference between the CO1PH20F and the CO1PHR320?
A: The pin type. The CO1PH20F has flat pins (standard Australian 20A) and the CO1PHR320 has round pins. Both are 20A single-pole 250V IP66 switched socket outlets.

Q: Is the CO1PH20F suitable for outdoor use?
A: Yes. It is rated IP66, meaning it is dust-tight and protected against high-pressure water jets, suitable for outdoor and wash-down environments.