GEN3 PL1PH15 15 Amp 3 Pin Flat Rewireable Plug Top Large Earth Pin

Description

Rugged 15A weatherproof power, flat pins.

The GEN3 PL1PH15 is a 15A single-phase industrial extension plug top with three flat pins and an IP66 weatherproof body. With a larger 15A earth pin and a compression gland for quick rewiring, it's a tough replacement plug for higher-draw leads and appliances on a 15A circuit.

Key Features

• 15A single phase, 3 flat pins (with larger 15A earth pin)
• 250V AC
• IP66 rated — dust-tight and protected against powerful water jets
• Compression gland for quick cable termination (rewireable)
• Tough orange PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Suits 15A flat-pin socket-outlets

Order it online now and we'll dispatch Australia-wide.

15A Pins, Industrial Build

The PL1PH15 uses the flat-pin pattern with the larger 15A earth pin, so it suits 15A socket-outlets for higher-current equipment. A 15A outlet will also accept a 10A plug, but the 15A pin means this plug will not fit a standard 10A outlet. It's wrapped in a rugged IP66 weatherproof housing built for the worksite rather than the lounge room.

Built for Australian Conditions

IP66 protection means it is dust-tight and withstands powerful water jets from any direction. A virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper (for lower heat rise) stand up to vibration, moisture and a wide -25°C to +70°C operating range.

Quick to Wire and Replace

A compression gland makes cable termination fast and secure, so it's a straightforward rewireable replacement plug top for a damaged or worn 15A lead. It is interchangeable with other major brands and pairs with the matching GEN3 15A flat-pin extension socket and appliance inlet to build or repair a complete lead.

Q: Will the GEN3 PL1PH15 fit a standard 10A power point?
A: No. It has the larger 15A earth pin, so it suits 15A socket-outlets. A 15A outlet will also take a 10A plug, but a 15A plug will not fit a 10A outlet.

Q: Is the GEN3 PL1PH15 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, suitable for outdoor and industrial use.

Q: Can the GEN3 PL1PH15 be rewired?
A: Yes. It is a rewireable plug top with a compression gland for quick, secure cable termination, and should be wired by a licensed electrician.