GEN3 WPGPO2 IP54 Weather Protected Double Power Point 250V

Description

Sealed outdoor power for sheltered spots.

The GEN3 WPGPO2 is a double-outlet power point with an IP54 weather-protected rating, giving you two switched 10A 250V outlets in damp and sheltered outdoor locations. It's a tough, cost-effective grey GPO for sheds, patios and under-eaves installations.

Key Features

• Double (twin) 10A power point outlet
• 250V AC
• IP54 weather-protected — dust-protected and guarded against splashing water
• Surface mount, grey finish
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper)
• Australian / NZ approved
• Interchangeable with other major brands

Order online now for fast dispatch Australia-wide.

What the IP54 Rating Means

IP54 tells you exactly how far this outlet's protection goes: the "5" means it is dust-protected, and the "4" means it is protected against water splashing from any direction. In practice that makes it well suited to sheltered, damp positions — under eaves, on a patio, inside a shed, garage or workshop. It is not rated for direct hosing or fully immersed conditions; choose a higher-rated IP66 outlet where high-pressure water jets or full exposure are expected.

Built for Australian Conditions

The WPGPO2 uses a virgin-grade PCA18 plastic body with 316 stainless steel springs and screws for corrosion resistance, and brass current-carrying parts of greater than 85% copper. It carries Australian/New Zealand approval and is interchangeable with other major-brand outlets, so it slots straight into a compliant fit-out or a like-for-like replacement.

Two Outlets in One Weather-Protected Point

A twin-outlet design means you can run two appliances or leads from a single surface-mounted point, handy for outdoor power around the home, shed or worksite. Note that "double" here refers to the two sockets — the WPGPO2 is a double-outlet GPO and is not marketed as a double-pole switched outlet.

Q: What does the IP54 rating mean and where can I install the GEN3 WPGPO2?
A: IP54 means it is dust-protected and protected against splashing water from any direction. It suits sheltered, damp areas such as sheds, patios and under eaves, but not direct hosing or full weather exposure — use an IP66-rated outlet for those.

Q: Is the GEN3 WPGPO2 double pole?
A: "Double" refers to its two outlets, not its switching. It is a twin-outlet 10A power point; if your installation specifically requires double-pole isolation, select a double-pole rated product.

Q: Is the GEN3 WPGPO2 Australian approved?
A: Yes, it is supplied with Australian/New Zealand approval certification and must be installed by a licensed electrician.