Transco P1WP Neptune Weatherproof Single Power Point 10A IP53 White

Description

10 Amp Weatherproof Power. Single Outlet. Surface Mount Ready.

The Transco P1WP is an IP53 rated weatherproof single outlet power point rated at 10A and 240V AC — the compact surface mount solution for outdoor, wet area, and exposed installations where one socket outlet is needed and the environment demands more than a standard indoor power point can deliver. White impact-resistant polycarbonate construction, surface mount only, sold as a complete unit.

• Transco Neptune series — IP53 weatherproof single outlet power point
• White impact-resistant polycarbonate construction
• 1 x switched 240V AC socket outlet — 10A rated
• IP53 ingress protection — dust protected, protected against water spray
• Rocker switch on outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W112 mm x D82 mm x H72 mm
• Fixing centres: 95 mm
• Surface mount only
• Horizontal wall mounting
• Also available in 15A (P1WP15), double outlet 10A (P2WP), double outlet 15A (P2WP15)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where the P1WP Is the Right Weatherproof Specification

IP53 weatherproof power points are the standard specification for outdoor and wet area locations where the environment involves dust and water spray — undercover alfresco areas, covered outdoor entertaining spaces, garages, carports, commercial kitchens, and any other location where splashing and dust exposure are expected but high-pressure water jets are not. The P1WP delivers one 10A outlet in that specification — the right product where a single dedicated outdoor socket is all that's required at the location. A single outlet keeps the installation compact and purposeful without oversizing the plate.

The surface mount format means no wall cavity is required — the unit mounts directly to the wall surface, making it straightforward to install on brick, masonry, timber, and any other wall type without cutting a recess. The 95mm fixing centres and W112 x D82 x H72mm dimensions are the standard for this product and should be accounted for when selecting surface mounting hardware. The moulded polycarbonate construction is impact-resistant and durable, suited to long-term outdoor exposure.

The P1WP is the 10A single outlet variant in the Transco IP53 weatherproof power point range. Also available in 15A single outlet (P1WP15), 10A double outlet (P2WP), and 15A double outlet (P2WP15) for installations where a higher amp rating or two socket positions are required. All variants share the same IP53 rating, white polycarbonate construction, and surface mount format.

Q: What is the IP53 rating of the Transco P1WP?
A: IP53 means the P1WP is dust protected (first digit 5 — no harmful dust ingress) and protected against water spray up to 60 degrees from vertical (second digit 3). This makes it suitable for covered outdoor areas, garages, and wet areas where splashing and dust are expected but high-pressure water jets are not.

Q: What is the difference between the P1WP and the P2WP?
A: The P1WP is the single outlet variant and the P2WP is the double outlet variant. Both share the same IP53 rating, 10A current rating, dimensions, fixing centres, and surface mount format. Choose the P1WP where one socket position is required and the P2WP where two are needed.

Q: Is the Transco P1WP suitable for flush mount installations?
A: No. The P1WP is surface mount only. It mounts directly to the wall surface without requiring a wall recess, making it suitable for brick, masonry, timber, and other wall types where cutting a cavity is not practical or required.