SAL LR63DL LED R63 Lamp 8W E27 6000K Daylight - Non-Dimmable

Description

6000K daylight precision. R63 size. Direct LED replacement.

The SAL LR63DL is an 8W non-dimmable LED R63 reflector lamp with a fixed 6000K Daylight colour temperature, E27 Edison Screw base, opal polycarbonate diffuser over a poly-covered aluminium body, and a directional 120° beam angle — a direct 1:1 energy-efficient LED replacement for traditional R63 reflector lamps in Australian residential and commercial downlight, recessed ceiling, and directional fitting applications.

• Power: 8W, 240V AC, 50Hz
• Lumens: 600 lm
• CCT: 6000K Daylight (fixed — not selectable)
• CRI: >80
• Beam Angle: 120°
• Base: E27 Edison Screw (27mm)
• Dimmable: No
• Body: Opal polycarbonate diffuser, poly-covered aluminium
• Diameter: 63mm | Length: 102mm
• IP Rating: IP20 (interior dry-location use only)

Fast shipping across Australia — order online now for quick dispatch.

6000K Daylight — Maximum Clarity for Task and Display Applications

The LR63DL is a fixed 6000K Daylight lamp — the coolest, crispest, and brightest-appearing colour temperature in the standard LED range. At 6000K, the light is a clean, neutral white with a slight blue-white character that maximises perceived brightness and visual contrast. This is the preferred CCT for task areas, retail displays, workshops, garages, reading lamps, and commercial spaces where maximum visual acuity is the priority. 6000K is also favoured for CCTV-monitored areas and any application where colour accuracy and sharpness of detail matter most. For a warmer ambience suited to living areas and hospitality, see the LR63WW sibling at 2700K Warm White.

What is an R63 lamp — and do I have one?

R63 refers to a reflector lamp with a 63mm diameter. Reflector lamps (R-type) have a built-in parabolic reflector cup that directs light forward into a controlled beam — unlike round GLS globes which spread light in all directions. R63 lamps were commonly used in older Australian recessed ceiling downlights, desk lamps, display and retail spotlights, and adjustable track fittings that accept E27 screw-base lamps. At 63mm diameter and 102mm length, the LR63DL is a 1:1 size match for traditional R63 lamps — it screws directly into any E27 R63 fitting with no wiring changes required. 8W replaces a typical 60–75W incandescent R63, delivering approximately 87–89% energy saving.

120° directional beam — focused without being a spotlight.

The 120° beam is more focused than a standard GLS globe (320°) — directing light forward and downward rather than in all directions. This makes the LR63DL suitable for recessed downlight fittings, directional ceiling spotlights, desk lamps, and display lighting. The opal polycarbonate diffuser softens the LED output for even illumination across the lamp face without harsh hot-spots from individual LED chips.

Q: Will the LR63DL fit my existing fitting?
A: If your existing fitting accepts an E27 screw-base R63 lamp (63mm wide), yes. The LR63DL is 63mm in diameter and 102mm in length — a 1:1 size match for standard R63 reflector lamps. Confirm the fitting's lamp holder is E27 and that the housing can accommodate a 63mm wide lamp.

Q: What is the difference between LR63DL and LR63WW?
A: Both are SAL R Series 8W non-dimmable LED R63 lamps with the same 600 lm output, 120° beam, E27 base, opal diffuser, and 63 x 102mm dimensions. The LR63DL (this product) is 6000K Daylight — the crispest, brightest-appearing CCT, suited to task areas, retail displays, workshops, and garages. The LR63WW sibling is 2700K Warm White — suited to living areas, dining rooms, hospitality, and anywhere a warm, soft light is preferred.

Q: Can I connect this lamp to a dimmer?
A: No — the LR63DL has an integral non-dimmable LED driver. Connecting it to a wall dimmer may cause flicker, buzzing, or shorten the lamp's life. Use only on standard switched (non-dimming) circuits.