SAL LPAR38TC LED PAR38 Lamp 12W E27 IP65 - Selectable CCT

Description

PAR38 LED replacement. IP65. Three colours. Plug-in simplicity.

The SAL LPAR38TC is a 12W IP65-rated PAR38 LED lamp with selectable colour temperature (3000K / 4000K / 6000K) and an E27 Edison Screw base — designed as a direct plug-in replacement for existing PAR38 floodlight fittings in covered eave environments, exterior track systems, and IP65-rated recessed PAR38 downlight fixtures. A DIP switch selects the colour temperature before installation, so one SKU covers warm alfresco lighting, cool-white task lighting, and daylight-mode security from a single part number on the van.

• Power: 12W, 240V AC, 50Hz
• Lumens: 1500 lm (3000K) / 1700 lm (4000K) / 1500 lm (6000K)
• CCT: Selectable 3000K / 4000K / 6000K via DIP switch
• CRI: >80
• Beam Angle: 100°
• IP Rating: IP65
• Base: E27 (Edison Screw 27mm)
• Dimensions: 122mm diameter x 134mm length
• Dimmable: No
• Application: Designed for equivalent IP65-rated PAR38 floodlight fittings in covered eave environments

Important: Always switch the power supply OFF before adjusting the CCT DIP switch — changing the setting under live power may damage the integral driver.

Fast shipping across Australia — order online now for quick dispatch.

Why IP65 Matters for a PAR38 Lamp

Most standard LED lamps are rated IP20 — interior dry-location use only. Install one in an exterior PAR38 fitting and it will eventually fail from humidity, condensation, or the occasional splash that gets past the fitting's diffuser. The LPAR38TC's IP65 rating means the lamp body itself is fully dust-tight and protected against water jets from any direction — so it can withstand the conditions typical of an Australian covered eave or alfresco environment without premature failure. SAL specifically designs this lamp for installation in equivalent IP65-rated PAR38 floodlight fittings in covered eave environments. Always confirm the fitting's IP rating matches the application before installation.

What is a PAR38 lamp and do I have one?

PAR stands for Parabolic Aluminised Reflector. The "38" refers to the lamp diameter in eighths of an inch — 38 x 1/8" = approximately 122mm. PAR38 is one of the most widely used exterior lamp sizes in Australia, found in eave-mount floodlight fittings, adjustable exterior track systems, covered alfresco recessed downlights, and landscape spotlight fixtures. If your existing fitting has a large, wide screw-in globe with a distinct internal reflector cup shape, it is almost certainly a PAR38 fixture. The LPAR38TC screws directly into any E27 PAR38 socket — no electrician required for a straightforward lamp replacement in most states (check local regulations).

Three colour temperatures — commit on site.

The DIP switch gives three options before the lamp is installed: 3000K Warm White for traditional home exteriors, alfresco areas, and verandahs where a softer, warmer exterior light suits the setting; 4000K Cool White for most general-purpose exterior task and security lighting; and 6000K Daylight for maximum-visibility applications, CCTV-monitored areas, and commercial premises. Set it once with the power off, screw in the lamp, and the CCT is locked in for the life of the fitting.

Q: Will the LPAR38TC fit my existing PAR38 fitting?
A: If your fitting accepts an E27 screw-base lamp and is rated for PAR38 lamps (approximately 122mm wide), yes. The LPAR38TC is 122mm in diameter and 134mm in length — confirm these dimensions fit within your fitting's lamp cavity before ordering, particularly for deep-recessed or tight-clearance PAR38 fittings.

Q: Can I install this lamp in a fully exposed outdoor position?
A: The lamp is rated IP65, but SAL specifies it is designed for installation in equivalent IP65-rated PAR38 fittings in covered eave environments. The IP65 rating is valid when installed in a matching IP65-rated fitting — an installation in a non-IP-rated fitting in a fully exposed position would not maintain the lamp's weather protection. Always match the lamp's IP rating, the fitting's IP rating, and the installation environment.

Q: Is the LPAR38TC dimmable?
A: No. The LPAR38TC has an integral non-dimmable LED driver. Connecting it to a wall dimmer will not dim the lamp and may cause flicker, buzzing, or premature lamp failure. Do not install on a dimmer circuit.