SAL LCA27E14D/C LED Candle Lamp 4W E14 2700K Clear - Dimmable

Description

Filament LED candle. 2700K warmth. Dimmable. The authentic incandescent look in E14.

The SAL LCA27E14D/C is a 4W dimmable LED filament candle lamp with a fixed 2700K Warm White colour temperature, clear glass body, E14 Edison Screw 14mm (SES) base, 320° near-omnidirectional beam, and an integral trailing-edge dimmable LED driver — designed as a direct LED replacement for traditional 25–40W incandescent candle lamps in Australian residential chandeliers, candelabra-style pendant arms, wall sconces, table lamps, and decorative fitting applications. At 450 lm from 4W, the LCA27E14D/C delivers significant energy savings with the warm 2700K filament visible through clear glass, creating the classic decorative appearance of a traditional incandescent candle lamp.

• Power: 4W, 240V AC, 50Hz
• Lumens: 450 lm
• CCT: 2700K Warm White (fixed)
• CRI: >80
• Beam Angle: 320°
• Base: E14 Edison Screw 14mm (SES)
• Dimmable: Yes — Trailing Edge
• Body: Clear glass
• Light Source: LED filament
• Diameter: 37mm | Length: 97mm
• IP Rating: IP20
• Max Ambient Temp: 25°C

Important: Trailing-edge dimmable — do not connect to leading-edge dimmers. Fixed 2700K Warm White — not selectable. IP20 interior dry-location use only.

Fast shipping across Australia — order online now for quick dispatch.

LED Filament — The Authentic Incandescent Look

The LCA27E14D/C uses a high-efficiency LED filament — a visible filament element inside a clear glass body — rather than the SMD LED chip arrays used in most LED lamps. The LED filament closely replicates the visual appearance of a traditional incandescent candle lamp: a warm, glowing filament visible through clear glass that creates the same decorative, intimate character as the original incandescent lamp. This makes the LCA27E14D/C well suited to applications where the lamp itself is visible and its appearance matters — chandeliers, candelabra pendant arms, exposed-bulb fittings, wall sconces, and open decorative table lamps where the classic filament look is preferred over the uniform opal diffuser of a standard LED lamp.

Dimmable trailing edge — smooth dimming with modern Australian dimmers.

The integral trailing-edge dimmable driver is compatible with most modern Australian trailing-edge LED-rated wall dimmers (Clipsal Iconic Dimmable, HPM, Mercator, Legrand, and similar). Dimming the lamp smoothly reduces lumen output and warms the apparent colour temperature — further enhancing the warm, intimate character of the 2700K output at low dim levels. Always confirm the dimmer is trailing-edge LED-rated; leading-edge (incandescent/halogen) dimmers will cause flicker or reduced dimming range. For multi-lamp installations such as chandeliers, confirm the dimmer's minimum and maximum LED load rating covers the total wattage of all connected lamps.

2700K — the warmest standard LED CCT, matching traditional incandescent.

At 2700K, the light creates an intimate, flattering, and inviting atmosphere in living areas, dining rooms, bedrooms, and hospitality spaces. For a cooler 5000K Neutral Daylight version, see the LCA50E14D/C sibling. The LCA27E14D/C is the most widely chosen version for residential decorative lamp applications in Australia.

Q: Will this lamp work with my existing dimmer?
A: The LCA27E14D/C is compatible with most modern Australian trailing-edge LED-rated dimmers. It is not compatible with leading-edge (incandescent/halogen) dimmers — check your dimmer's label or packaging to confirm it is trailing-edge LED-rated. For multi-lamp chandelier circuits, confirm the dimmer's minimum LED load rating, as some dimmers may flicker or not dim correctly if total lamp wattage falls below the minimum load threshold.

Q: What other base variants are available?
A: The LCA27D/C family is available in four base types — all delivering the same 4W, 450 lm, 2700K, 320°, trailing-edge dimmable specification in the same 37mm diameter clear glass candle form factor (length varies slightly by base): LCA27E14D/C (this product) — E14 SES (97mm L); LCA27B22D/C — B22 bayonet (91mm L); LCA27E27D/C — E27 ES; LCA27B15D/C — B15 SBC (95mm L). Choose based on the lamp holder type in your fitting.

Q: What is the difference between LCA27E14D/C and LCA50E14D/C?
A: Both are SAL 4W dimmable clear LED filament candle lamps with E14 base, 450 lm, 320°, trailing-edge dimmable, IP20, 37mm x 97mm. The only difference is CCT: LCA27E14D/C (this product) is 2700K Warm White — the warmest, most traditional incandescent colour. LCA50E14D/C is 5000K Neutral Daylight — a cooler, brighter white suited to commercial or task-oriented applications.