SAL LR80WW LED R80 Lamp 9W E27 3000K Warm White - Non-Dimmable

Description

3000K warmth. R80 size. Direct LED replacement.

The SAL LR80WW is a 9W non-dimmable LED R80 reflector lamp with a fixed 3000K Warm White colour temperature, E27 Edison Screw base, opal polycarbonate diffuser over a poly-covered aluminium body, and a directional 120° beam angle — a direct 1:1 energy-efficient LED replacement for traditional R80 reflector lamps in Australian residential and commercial downlight, recessed ceiling, and directional fitting applications.

• Power: 9W, 240V AC, 50Hz
• Lumens: 850 lm
• CCT: 3000K Warm White (fixed — not selectable)
• CRI: >80
• Beam Angle: 120°
• Base: E27 Edison Screw (27mm)
• Dimmable: No
• Body: Opal polycarbonate diffuser, poly-covered aluminium
• Diameter: 80mm | Length: 113mm
• IP Rating: IP20 (interior dry-location use only)

Fast shipping across Australia — order online now for quick dispatch.

3000K Warm White — Warm, Inviting Ambience for Residential and Hospitality

The LR80WW is a fixed 3000K Warm White lamp — the warmest standard LED CCT in the SAL R Series. At 3000K, the light closely matches the colour of traditional incandescent lamps — a golden-warm tone that flatters interior finishes, food presentation, skin tones, and furnishings. This is the preferred CCT for living areas, dining rooms, hospitality venues, and any space where a warm, relaxed ambience is the priority. For a crisper, brighter daylight-quality output suited to task areas, workshops, and retail display, see the LR80DL sibling at 6000K Daylight.

What is an R80 lamp — and do I have one?

R80 refers to a reflector lamp with an 80mm diameter. Reflector lamps (R-type) have a built-in parabolic reflector cup that directs light forward into a controlled beam — unlike round GLS globes which spread light in all directions. R80 lamps were commonly used in older Australian recessed ceiling downlights, desk lamps, display and retail spotlights, and adjustable track fittings that accept E27 screw-base lamps. At 80mm diameter and 113mm length, the LR80WW is a 1:1 size match for traditional R80 lamps — it screws directly into any E27 R80 fitting with no wiring changes required. 9W replaces a typical 75–100W incandescent R80, delivering approximately 88–91% energy saving.

120° directional beam — focused without being a spotlight.

The 120° beam is more focused than a standard GLS globe (320°) — directing light forward and downward rather than in all directions. This makes the LR80WW suitable for recessed downlight fittings, directional ceiling spotlights, desk lamps, and display lighting. The opal polycarbonate diffuser softens the LED output for even illumination across the lamp face without harsh hot-spots from individual LED chips.

Q: Will the LR80WW fit my existing fitting?
A: If your existing fitting accepts an E27 screw-base R80 lamp (80mm wide), yes. The LR80WW is 80mm in diameter and 113mm in length — a 1:1 size match for standard R80 reflector lamps. Confirm the fitting's lamp holder is E27 and that the housing can accommodate an 80mm wide lamp.

Q: What is the difference between LR80WW and LR80DL?
A: Both are SAL R Series 9W non-dimmable LED R80 lamps with the same 850 lm output, 120° beam, E27 base, opal diffuser, and 80 x 113mm dimensions. The LR80WW (this product) is 3000K Warm White — suited to living areas, dining rooms, hospitality, and anywhere a warm, soft light is preferred. The LR80DL sibling is 6000K Daylight — the crispest, brightest-appearing CCT, suited to task areas, retail displays, workshops, and garages.

Q: Can I connect this lamp to a dimmer?
A: No — the LR80WW has an integral non-dimmable LED driver. Connecting it to a wall dimmer may cause flicker, buzzing, or shorten the lamp's life. Use only on standard switched (non-dimming) circuits. For dimming applications in an R80 fitting, see the SAL LR80/D dimmable R80 filament range.