SAL LR80DL LED R80 Lamp 9W E27 6000K Daylight - Non-Dimmable

Description

6000K daylight precision. R80 size. Direct LED replacement.

The SAL LR80DL is a 9W non-dimmable LED R80 reflector lamp with a fixed 6000K Daylight colour temperature, E27 Edison Screw base, opal polycarbonate diffuser over a poly-covered aluminium body, and a directional 120° beam angle — a direct 1:1 energy-efficient LED replacement for traditional R80 reflector lamps in Australian residential and commercial downlight, recessed ceiling, and directional fitting applications.

• Power: 9W, 240V AC, 50Hz
• Lumens: 850 lm
• CCT: 6000K Daylight (fixed — not selectable)
• CRI: >80
• Beam Angle: 120°
• Base: E27 Edison Screw (27mm)
• Dimmable: No
• Body: Opal polycarbonate diffuser, poly-covered aluminium
• Diameter: 80mm | Length: 113mm
• IP Rating: IP20 (interior dry-location use only)

Fast shipping across Australia — order online now for quick dispatch.

6000K Daylight — Maximum Clarity for Task and Display Applications

The LR80DL is a fixed 6000K Daylight lamp — the coolest, crispest, and brightest-appearing colour temperature in the standard LED range. At 6000K, the light is a clean, neutral white with a slight blue-white character that maximises perceived brightness and visual contrast. This is the preferred CCT for task areas, retail displays, workshops, garages, reading lamps, and commercial spaces where maximum visual acuity is the priority. 6000K is also favoured for CCTV-monitored areas and any application where colour accuracy and sharpness of detail matter most. For a warmer ambience suited to living areas and hospitality, see the LR80WW sibling at 3000K Warm White.

What is an R80 lamp — and do I have one?

R80 refers to a reflector lamp with an 80mm diameter. Reflector lamps (R-type) have a built-in parabolic reflector cup that directs light forward into a controlled beam — unlike round GLS globes which spread light in all directions. R80 lamps were commonly used in older Australian recessed ceiling downlights, desk lamps, display and retail spotlights, and adjustable track fittings that accept E27 screw-base lamps. At 80mm diameter and 113mm length, the LR80DL is a 1:1 size match for traditional R80 lamps — it screws directly into any E27 R80 fitting with no wiring changes required. 9W replaces a typical 75–100W incandescent R80, delivering approximately 88–91% energy saving.

120° directional beam — focused without being a spotlight.

The 120° beam is more focused than a standard GLS globe (320°) — directing light forward and downward rather than in all directions. This makes the LR80DL suitable for recessed downlight fittings, directional ceiling spotlights, desk lamps, and display lighting. The opal polycarbonate diffuser softens the LED output for even illumination across the lamp face without harsh hot-spots from individual LED chips.

Q: Will the LR80DL fit my existing fitting?
A: If your existing fitting accepts an E27 screw-base R80 lamp (80mm wide), yes. The LR80DL is 80mm in diameter and 113mm in length — a 1:1 size match for standard R80 reflector lamps. Confirm the fitting's lamp holder is E27 and that the housing can accommodate an 80mm wide lamp.

Q: What is the difference between LR80DL and LR80WW?
A: Both are SAL R Series 9W non-dimmable LED R80 lamps with the same 850 lm output, 120° beam, E27 base, opal diffuser, and 80 x 113mm dimensions. The LR80DL (this product) is 6000K Daylight — the crispest, brightest-appearing CCT, suited to task areas, retail, workshops, and garages. The LR80WW sibling is 3000K Warm White — suited to living areas, dining rooms, hospitality, and anywhere a warmer, softer light is preferred.

Q: Can I connect this lamp to a dimmer?
A: No — the LR80DL has an integral non-dimmable LED driver. Connecting it to a wall dimmer may cause flicker, buzzing, or shorten the lamp's life. Use only on standard switched (non-dimming) circuits. For dimming applications in an R80 fitting, see the SAL LR80/D dimmable R80 filament range.