SAL LR50WW LED R50 Lamp 6W E14 2700K Warm White - Non-Dimmable

Description

2700K warmth. R50 size. Direct LED replacement for E14 fittings.

The SAL LR50WW is a 6W non-dimmable LED R50 reflector lamp with a fixed 2700K Warm White colour temperature, E14 Edison Screw (SES) base, opal polycarbonate diffuser over a poly-covered aluminium body, and a directional 120° beam angle — a direct 1:1 energy-efficient LED replacement for traditional R50 reflector lamps in Australian residential and commercial downlight, recessed ceiling, and directional fitting applications.

• Power: 6W, 240V AC, 50Hz
• Lumens: 430 lm
• CCT: 2700K Warm White (fixed — not selectable)
• CRI: >80
• Beam Angle: 120°
• Base: E14 Edison Screw (SES, 14mm)
• Dimmable: No
• Body: Opal polycarbonate diffuser, poly-covered aluminium
• Diameter: 50mm | Length: 89mm
• IP Rating: IP20 (interior dry-location use only)

Fast shipping across Australia — order online now for quick dispatch.

2700K Warm White — Warm, Inviting Ambience for Residential and Hospitality

The LR50WW is a fixed 2700K Warm White lamp — the warmest standard LED CCT in the SAL R Series. At 2700K, the light closely matches the colour of traditional incandescent lamps — a golden-warm tone that flatters interior finishes, food presentation, skin tones, and furnishings. This is the preferred CCT for living areas, dining rooms, hospitality venues, and any space where a warm, relaxed ambience is the priority. For a crisper, brighter daylight-quality output suited to task areas and retail display, see the LR50DL sibling at 6000K Daylight.

What is an R50 lamp — and do I have one?

R50 refers to a reflector lamp with a 50mm diameter. Reflector lamps (R-type) have a built-in parabolic reflector cup that directs light forward into a controlled beam — unlike round GLS globes which spread light in all directions. R50 lamps were commonly used in older Australian recessed ceiling downlights, desk lamps, display and retail spotlights, and adjustable fittings that accept E14 screw-base lamps. At 50mm diameter and 89mm length, the LR50WW is a 1:1 size match for traditional R50 lamps — it screws directly into any E14 R50 fitting with no wiring changes required. 6W replaces a typical 25–40W incandescent R50, delivering approximately 80–85% energy saving.

120° directional beam — focused without being a spotlight.

The 120° beam is more focused than a standard GLS globe (320°) — directing light forward and downward rather than in all directions. This makes the LR50WW suitable for recessed downlight fittings, directional ceiling spotlights, desk lamps, and display lighting. The opal polycarbonate diffuser softens the LED output for even illumination across the lamp face without harsh hot-spots from individual LED chips.

Q: Will the LR50WW fit my existing fitting?
A: If your existing fitting accepts an E14 (SES) screw-base R50 lamp (50mm wide), yes. The LR50WW is 50mm in diameter and 89mm in length — a 1:1 size match for standard R50 reflector lamps. Confirm the fitting's lamp holder is E14 and that the housing can accommodate a 50mm wide lamp.

Q: What is the difference between LR50WW and LR50DL?
A: Both are SAL R Series 6W non-dimmable LED R50 lamps with the same 430 lm output, 120° beam, E14 base, opal diffuser, and 50 x 89mm dimensions. The LR50WW (this product) is 2700K Warm White — suited to living areas, dining rooms, hospitality, and anywhere a warm, soft light is preferred. The LR50DL sibling is 6000K Daylight — suited to task areas, retail displays, and applications where crisp, bright light is required.

Q: Can I connect this lamp to a dimmer?
A: No — the LR50WW has an integral non-dimmable LED driver. Connecting it to a wall dimmer may cause flicker, buzzing, or shorten the lamp's life. Use only on standard switched (non-dimming) circuits.