Red Smoke R9 Stand Alone 9V Battery Photoelectric Smoke Alarm

SKU: rer9

Product Image Gallery

Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9
Product image thumbnail for SKU rer9

Product Pricing

$11.33 (ex-GST)

$12.46 (inc-GST)

$12.46

$11.33

(inc-GST)
(ex-GST)

Stock and Availability

  • ⚫︎ 7 In Stock

Smoke alarm suitable for Caravan RV, Trailers and Motorhomes. NOT Interconnected.

Electrotraders USPs

Fast Shipping, Trusted by Government, Easy Returns, Free Shipping over $200


Description

This is a stand-alone alarm – it does not interconnect.

The Red Smoke R9 is a compact, entry-level photoelectric smoke alarm powered by a replaceable 9V battery. It is not interconnectable: when it detects smoke, only this alarm sounds. With no wiring needed, it is an easy, low-cost option for single rooms, caravans and RVs – just be certain a stand-alone alarm suits your needs before ordering.

Key Features

  • Stand-alone alarm – not interconnectable (sounds on its own only)
  • Type A photoelectric sensor – detects smouldering and open fires
  • Replaceable 9V battery – no wiring required
  • Test / hush button with red LED warning and low-battery indicator
  • 85 dB alarm at 3m (ISO 8201 pattern), approximately 8-second response
  • Compact 100mm diameter, 34mm profile
  • Suits caravans, RVs, trailers and motorhomes
  • Certified to AS 3786:2014+A1:2015+A2:2018 (CSIRO ActivFire)

Grab one online for fast dispatch Australia-wide.

 

Important: Check You Need a Stand-Alone Alarm

Inter-connected alarms are required by law in some jurisdictions, including Queensland, where leased and sold dwellings must have photoelectric, interconnected alarms in all bedrooms, connecting hallways and on each storey. The R9 is a stand-alone alarm and will not meet an interconnect requirement on its own. Click here for inter-connected smoke alarms – the wireless R10RF links up to 40 alarms by RF.

Simple, Low-Cost Protection

The R9 is the most basic alarm in the Red Smoke range: a compact photoelectric detector that runs on a single replaceable 9V battery, with no wiring to install. The photoelectric sensor responds well to slow, smouldering fires, and the test/hush button lets you silence a nuisance alarm for around 10 minutes. Its small 100mm footprint suits caravans, RVs and single-room domestic use.

Q: Can the Red Smoke R9 be interconnected with other alarms?
A: No. The R9 is a stand-alone alarm and cannot be interconnected. When it detects smoke, only this alarm sounds. For interconnected coverage, use the wireless R10RF.

Q: What battery does the Red Smoke R9 use?
A: A replaceable 9V battery (such as an Energizer 522) with around one year of life. Unlike the sealed 10-year R10, the R9's battery is replaced when it runs low.

Q: Is the Red Smoke R9 suitable for a caravan or RV?
A: Yes. As a compact, battery-powered stand-alone alarm with no wiring, it suits caravans, RVs, trailers and motorhomes, as well as single-room domestic use.

 

RED Smoke Alarms Model Comparison

Compare RED Smoke Alarm models, battery types and mounting options to find the right alarm for your installation. For Queensland's 2027 requirements, all required smoke alarms must be interconnected.

Type Model Range Battery Mount Wireless Adaptor*
Standalone Smoke Alarms – Not Interconnected
Standalone R10 Original 10 Yr Lithium Surface N/A
Standalone R9 Original 9V Battery Surface N/A
Interconnected Smoke Alarms – Hardwired
Hardwired R240 Original 9V Battery Surface RWB
Hardwired R240RC Original Rechargeable Surface RWB
Hardwired R240P Professional 9V Battery Surface RF Module
Hardwired RFMDual Professional 10 Yr Lithium Flush RF Module
Hardwired RSDualP Professional 10 Yr Lithium Surface RF Module
Interconnected Smoke Alarms – Wireless
Wireless R10RF Original 10 Yr Lithium Surface In-built
Wireless R10RFP Professional 10 Yr Lithium Surface In-built
Interconnected HEAT Alarms
Wireless RHA10RF   10 Yr Lithium Surface In-built
Hardwired RHA240SL   Rechargeable Surface RF Module

Important: R9 and R10 are standalone models and do not meet Queensland's interconnected smoke alarm requirements on their own. Hardwired models require a licensed electrician for installation. Wireless adaptors listed above are required when connecting compatible hardwired models via RF. Always confirm compatibility before purchasing. *Hardwired models need a compatible adaptor to connect with any wireless alarms.

Queensland Smoke Alarm Upgrade Cheat Sheet

Upgrading your smoke alarms? Start with your existing installation to find the right combination.

Your Situation What You Need RED Smoke Alarm Options
Replacing existing hardwired alarms New hardwired photoelectric alarms R240, R240RC, R240P, RFMDual or RSDualP
Installing alarms in additional rooms Interconnected wireless alarms can be an option R10RF or R10RFP – 10-year lithium battery
Connecting R240 or R240RC to wireless alarms Compatible wireless base RWB Wireless Base
Connecting RFMDual or RSDualP with wireless alarms Compatible wireless module RFMod Wireless Module

Popular RED Smoke Alarm Combinations

Important: Existing hardwired alarms must generally be replaced with hardwired alarms in Queensland. All required alarms must be interconnected. Check model compatibility before purchasing. Hardwired installation must be carried out by a licensed electrician.

Read our Queensland Smoke Alarm Requirements Guide →

Warranty


Red Smoke Alarms come with a 10 year warranty

 

Red Smoke Alarms – Manufacturer Warranty

Red Smoke Alarms are built to last and backed by a 10-year warranty for both residential and commercial use. Faults are rare, but if something does go wrong, support is just a call or click away.

To submit a warranty claim, you can either:

Red Smoke Alarms are supported by a national network of service agents ready to assist in the unlikely event of a fault.

Note: For the fastest resolution, contact Red Smoke Alarms directly. Warranty claims and repairs are handled exclusively by their team—not through Electrotraders.

(rer9)

Specifications

Key Information
Product Brand Red Smoke Alarms
Product or Component Smoke alarm (stand-alone)
Device Application Early detection of smouldering and open fires
Sensor Type Type A photoelectric sensor
Colour White
Quantity Set of 1
Packaging Type Carton
Power & Battery
Battery Type 9V carbon zinc battery, replaceable (e.g. Energizer 522)
Battery Life 1 year
Operating Current (standby) 10 µA
Functionality
Detection Type Smoke
Functions Available Hush function, self-test, local alarm
Control Type Button for test / hush function
Interconnect Capability None – stand-alone alarm (not interconnectable)
Response Time Approx. 8 seconds
Noise Level 85 dB at 3m minimum (ISO 8201 alarm pattern)
Time Delay Range 10 min: hush; 10 hr: silence
Local Signal Sound: alarm / signal; visual: 1 red LED (warning and low battery)
Installation
Type of Installation Indoor
Device Mounting Surface
Mounting Support Wall-mount, ceiling
Fixing Mode By screws
Diameter 100 mm
Height 34 mm
Environment
Ambient Air Temperature 0–40°C
Relative Humidity 10–90%
Standards & Certifications
Product Certification CSIRO ActivFire (cert. afp-3785); UL-AU-20002
Compliance Standard AS 3786:2014+A1:2015+A2:2018
SKU rer9
Brand Red Smoke

Shipping Calculator


We Also Recommend



Others Also Bought


More From This Category