SAL Starpad II SE7071 LED Floodlight 30W IP65 IK07 - Black

Description

30W. 3,600 lumens. Compact flood for residential and light commercial.

The SAL Starpad II SE7071/30TC2/BK is a 30W non-dimmable LED floodlight with selectable colour temperature (3000K / 4000K / 5000K), a robust black powder-coated die-cast aluminium body, textured tempered glass front cover, IK07 impact rating, and IP65 weatherproof rating — designed for residential and light commercial exterior lighting applications. A 110° wide-flood beam delivering up to 3,600 lm at 4000K, pre-fitted 600mm 3-core rubber flex, and column, trunnion, and wall mounting options make this the right fitting for residential driveways, carports, building entries, and smaller commercial perimeters.

• Power: 30W, 240V AC, 50Hz
• Lumens: 3150 lm (3000K) / 3600 lm (4000K) / 3300 lm (5000K)
• CCT: Selectable 3000K / 4000K / 5000K via DIP switch
• CRI: >80
• Beam Angle: 110°
• IP Rating: IP65
• IK Rating: IK07
• Dimmable: No
• Body: Black powder-coated die-cast aluminium
• Dimensions: 207(L) x 36(W) x 135(H) mm | Mass: 0.84 kg
• Mounting: Column, trunnion or wall
• Operating Temp: Up to 50°C ambient
• IPART: Approved
• Cable: 600mm 3-core rubber flex, nickel-plated copper cable gland

Important: Always switch power OFF before adjusting the CCT DIP switch. Non-dimmable — do not connect to a wall dimmer. Installation by a licensed electrician is required in accordance with AS/NZS 3000.

Fast shipping across Australia — order online now for quick dispatch.

30W Wide-Flood — Built for Australian Exterior Conditions

At 30W delivering up to 3,600 lm at 4000K across a 110° wide-angle beam, the Starpad II SE7071/30TC2/BK provides broad area illumination for residential driveways, carports, building entries, and smaller commercial perimeters from a single compact fitting. The 110° beam is a wide-flood distribution — not a tight spotlight but a broad area wash suited to illuminating large flat surfaces and open spaces. At 4 to 6 metres mounting height, a single fitting provides working-plane illuminance across approximately 10 to 20 square metres. The operating temperature extends to 50°C ambient — suited to extreme Australian summer conditions in Western Australia, Queensland, and South Australia. IP65 means fully dust-tight and protected against water jets from any direction. IK07 provides meaningful resistance to incidental impact from equipment or debris in commercial and residential exterior settings.

Selectable CCT — commit on site via DIP switch.

The DIP switch selects the colour temperature with power off: 3000K Warm White for architectural facade lighting, hospitality exteriors, and residential properties where a warm, welcoming light is preferred; 4000K Cool White for most general-purpose commercial and security applications — the most common CCT for carparks, industrial sites, and commercial perimeters; and 5000K Natural White for sports facilities, CCTV-monitored areas, and applications where maximum colour accuracy and visual acuity at distance is required.

IPART approved — flexible mounting — switched-circuit operation.

The SE7071/30TC2/BK is listed on the NSW IPART energy efficiency scheme — always verify the current SKU listing at time of installation. Three mounting options (column, trunnion, wall) suit diverse site conditions. As a non-dimmable fitting, it integrates with any standard switched circuit, external photocell, astronomical timer, or upstream PIR sensor, giving the installer full flexibility over control method.

Q: What mounting options are available?
A: The Starpad II 30W supports column mounting (on a pole or post), trunnion mounting (on a bracket arm), and direct wall mounting. The 600mm pre-fitted rubber flex allows flexible positioning at the mounting point. Refer to the SAL installation sheet for specific mounting hardware and torque specifications.

Q: What is the difference between the Starpad II and Stargem III floodlights?
A: The Stargem III SE7080 is a twin-head spot floodlight (2 x adjustable heads, up to 30W total) suited to residential driveways, carports, and garden applications. The Starpad II SE7071 is a single-head wide-flood luminaire (15W to 100W) suited to commercial, industrial, and institutional applications with a wider 110° beam, IP65 rating, and IK07 impact rating. Choose the Starpad II for commercial perimeters and carparks requiring single-point high-output flood illumination.

Q: Can I connect an external PIR sensor or timer?
A: Yes — the fitting operates as a standard switched-circuit luminaire. Connect any external PIR motion sensor, astronomical timer, or photocell upstream in the circuit to control switching. The fitting has no integral sensor.