Pro-Vision PVST-12E-200-SEN 200W Sensor Solar Flood Light IP65 7000K

Description

Double the solar muscle for bigger, darker spaces.

The Pro-Vision PVST-12E-200-SEN is a 200W-class solar LED flood light with a 20W solar panel, 15,000mAh LiFePO4 battery, and 184 LED chips. Three operating modes – intelligent, remote, and sensor – in an IP65 die-cast aluminium body, with no mains wiring required.

Key Features

• 184 × SMD2835 LED chips producing crisp 7000K cool daylight output
• Fully solar powered – no 240V wiring, no electrician, no running costs
• Separate 20W/6V solar panel (390 x 300mm) for flexible sun-facing placement
• 15,000mAh 3.2V LiFePO4 battery – long-cycle-life lithium chemistry
• Three working modes: intelligent mode, remote control, and sensor activation
• 6–8 hour charge time; 12–15 hours of discharge covering 2–3 rainy days
• IP65 weatherproof die-cast aluminium body, 236 x 186 x 48mm lamp head
• 12-month warranty

Secure yours today and flood the yard with light – no cable runs, no power bills.

Why it Matters

More Chips, More Battery, More Coverage
With 184 LED chips against the 100W model's 116, plus a 50% larger battery and a bigger 20W panel, this is the step-up unit for wider driveways, larger yards, and work areas where a single smaller flood leaves dark edges.

Three Ways to Control It
Intelligent mode manages charging and output automatically, the remote control gives manual command from the ground, and sensor mode brings the light up when activity is detected – suited to entries and access points where light is only needed on approach.

Built for the Australian Outdoors
The IP65-rated die-cast aluminium housing seals out dust and water jets, and the separate panel design lets you mount the lamp in shade while the panel faces full sun. The supplier lists courtyards, roads, walls, parks, and squares among its intended applications.

What is the difference between this and the 100W model?
The 200W unit steps up to 184 LED chips, a 15,000mAh battery, and a 20W solar panel – against 116 chips, 10,000mAh, and 15W on the 100W – for brighter output and longer reserve from the same 6 to 8 hour charge.

Does this solar flood light need mains wiring?
No. It runs entirely from its solar panel and battery, so there is no 240V connection to install – mount the lamp and panel, and it is ready to run.

How long does it run between charges?
A 6 to 8 hour solar charge delivers 12 to 15 hours of discharge, with enough battery reserve to cover 2 to 3 rainy days.