Pro-Vision PVST-23C-400 400W Powerful Solar Flood Light 7000K Remote

Description

The brightest solar flood in the range.

The Pro-Vision PVST-23C-400 is a 400W-class solar LED flood light with a 25W solar panel, 20,000mAh battery, and 198 LED chips. It runs on intelligent mode with remote control, ships complete with lamp, panel, remote and fixings, and needs no mains wiring.

Key Features

• 198 × 2835 LED chips delivering crisp 7000K cool daylight output
• Fully solar powered – no 240V wiring, no electrician, no running costs
• Separate 25W/5V solar panel (390 x 360mm) for flexible sun-facing placement
• 20,000mAh 3.2V battery with intelligent charge and output management
• Remote control operation from the ground – no sensor, steady controllable light
• 6–8 hour charge time; 12–15 hours of discharge covering 2–3 rainy days
• Complete kit: lamp, solar panel, mounting screws and remote included
• 12-month warranty

Get yours today and flood the largest yard or worksite with solar light – no cabling required.

Why it Matters

The Top of the Powerful Range
With 198 LED chips, a 20,000mAh battery, and a 25W panel, this is the highest-output non-sensor solar flood in the range – built for large yards, car parks, worksites, and building frontages where the smaller powerful models leave dark edges, all without a metre of cable.

Steady Light, Not Motion-Triggered
It runs on intelligent mode with full remote control rather than a motion sensor, so the light stays on as you set it – suited to areas that need continuous light rather than triggered bursts.

Complete and Ready to Mount
The kit arrives with the lamp, the separate 25W panel, mounting screws, and the remote, so everything needed for installation is in the box. The separate panel design lets you mount the lamp in shade while the panel faces full sun.

Does this solar flood light have a motion sensor?
No. It runs on intelligent mode with remote control, giving steady, remotely controlled light rather than motion activation. Sensor models are available separately.

Does it need an electrician to install?
No. It is fully solar powered with no 240V mains connection, so there is no electrical wiring – mount the lamp and panel with the included screws, and it is ready to run.

What comes in the box?
The package includes the lamp, the separate 25W solar panel, mounting screws, and a remote control.