Pro-Vision PVST-12E-100-SEN 100W Sensor Solar Flood Light IP65 7000K

Description

Bright, wire-free floodlighting powered entirely by the sun.

The Pro-Vision PVST-12E-100-SEN is a 100W-class solar LED flood light with a separate 15W solar panel, 10,000mAh LiFePO4 battery, and three operating modes – intelligent, remote control, and sensor. IP65-rated die-cast aluminium, with no mains wiring required.

Key Features

• 116 × SMD2835 LED chips delivering crisp 7000K cool daylight output
• Fully solar powered – no 240V wiring, no electrician, no running costs
• Separate 15W/6V solar panel (390 x 235mm) for flexible sun-facing placement
• 10,000mAh 3.2V LiFePO4 battery – long-cycle-life lithium chemistry
• Three working modes: intelligent mode, remote control, and sensor activation
• 6–8 hour charge time; 12–15 hours of discharge covering 2–3 rainy days
• IP65 weatherproof die-cast aluminium body, compact at 189 x 166 x 48mm

Add it to your cart today and light up the dark corners without running a single cable.

Why it Matters

No Wiring, No Power Bills
Because the floodlight runs entirely from its solar panel and battery, there is no mains connection to install and nothing added to the electricity bill. That makes it practical for sheds, fences, gates, and other spots where running 240V cable would cost more than the light itself.

Three Ways to Control It
Intelligent mode manages charging and output automatically, the remote control gives manual command from the ground, and sensor mode brings the light up when activity is detected – useful for entries and driveways where light is only needed on approach.

Built for the Australian Outdoors
The IP65-rated die-cast aluminium housing seals out dust and water jets, and the separate panel design lets you mount the lamp in shade while the panel faces full sun. The supplier lists courtyards, roads, walls, parks, and squares among its intended applications.

Does this solar flood light need an electrician to install?
No. It is fully solar powered with no 240V mains connection, so there is no electrical wiring to install – mount the lamp and panel, and it is ready to run.

How long does it run on a full charge?
A 6 to 8 hour solar charge provides 12 to 15 hours of discharge time, with enough battery reserve to cover 2 to 3 rainy days.

Can the solar panel be mounted separately from the light?
Yes. The 390 x 235mm solar panel is a separate unit from the 189 x 166mm lamp head, so the panel can be positioned for maximum sun while the light points where you need it.