SAL Kingston SL2115/40TCD LED Oyster 30W 420mm IP54 - White

Description

Virtually flush to the ceiling. Three colours. One fitting covers the room.

The SAL Kingston SL2115/40TCD is a 30W dimmable LED oyster light with selectable colour temperature (3000K / 4000K / 5700K), IP54 weatherproof rating, and a super-low 30mm ceiling profile. At 420mm diameter with up to 2800 lumens of output, a single fitting covers large living areas, open-plan spaces, and commercial fit-outs that would otherwise need multiple smaller fittings. A DIP switch sets the colour temperature on site — one part number handles warm living rooms, cool kitchens, and bright workshops without stocking three separate products.

• Power: 30W, 240V AC, 50Hz
• Lumens: 2600 lm (3000K) / 2800 lm (4000K) / 2700 lm (5700K)
• CCT: Selectable 3000K / 4000K / 5700K via DIP switch
• CRI: 80
• Beam Angle: 100°
• IP Rating: IP54 (from below the ceiling)
• Dimmable: Yes — trailing edge
• Diameter: 420mm | Profile Height: 30mm | Mass: 1.14 kg
• Mounting: Ceiling surface mount, double insulated
• Warranty: 5-year residential / 3-year commercial

Fast shipping across Australia — order online now for quick dispatch.

Why the Kingston SL2115/40TCD Is the Go-To Ceiling Light for Larger Rooms

Standard oyster lights in the 200–300mm range work well for bedrooms and hallways, but leave larger living areas, open-plan dining rooms, and commercial reception spaces either under-lit or requiring multiple fittings. The Kingston 40TCD's 420mm face and 2800 lm peak output changes that equation — one fitting, one circuit connection, one DIP switch to set the colour, and the room is done. The 30mm profile sits virtually flush against the ceiling, avoiding the bulky look of batten replacements or older round oysters. This makes it equally suited to modern apartments with lower ceiling heights and to older Australian homes where a clean, low-profile ceiling fixture is the preferred solution.

IP54 — one fitting for indoors and covered outdoors.

The IP54 rating (dust-protected, splash-proof from any direction) means the Kingston covers bathrooms, laundries, covered alfresco areas, verandahs, and enclosed pergolas — all from the same part number. There is no need to stock a separate fitting for the bathroom and a separate one for the living room. For fully exposed outdoor locations subject to driving rain or direct coastal salt-spray, a higher IP65 or IP66 rated fitting would be required. IP54 is not rated for direct shower spray — always follow AS/NZS 3000 zone-of-protection rules for wet area installation.

The Kingston family — choosing the right size.

The Kingston SL2115/TCD range comes in three sizes to suit different rooms. The SL2115/25TCD is 13W with a 244mm diameter (up to 1150 lm, 26mm profile height) — suited to smaller bedrooms, bathrooms, and hallways. The SL2115/30TCD is 24W with a 294mm diameter (up to 2100 lm, 26mm profile height) — suited to medium rooms, kitchens, and studies. The SL2115/40TCD (this product) is 30W with a 420mm diameter (up to 2800 lm, 30mm profile height) — suited to large living areas, open-plan spaces, and commercial fit-outs. All three share the same IP54 rating, trailing-edge dimmable driver, selectable CCT, and double-insulated surface-mount construction.

Q: Is the Kingston SL2115/40TCD suitable for bathrooms and covered alfresco areas?
A: Yes to both. IP54 from below the ceiling covers bathrooms, ensuites, laundries (Zone 2 and outside zones per AS/NZS 3000), and covered exterior ceiling applications including alfresco areas, verandahs, and enclosed pergolas. It is not rated for direct shower spray (Zone 1) or fully exposed outdoor positions — use an IP65 or higher fitting for those locations.

Q: Does the Kingston SL2115/40TCD require a ceiling cut-out?
A: No — it is a surface-mount fitting. It mounts directly to the ceiling surface over the existing ceiling outlet. No cut-out, no ceiling cavity, and no downlight track required. Ideal for retrofit upgrades in homes and strata properties where surface-mount fittings are already in place.

Q: What dimmer is compatible with the Kingston SL2115/40TCD?
A: A trailing-edge dimmer rated for LED loads and capable of handling the 30W draw at full load. Most modern Australian LED wall dimmers from brands such as Clipsal Iconic, HPM, and Mercator include trailing-edge LED-compatible models. Check the dimmer's minimum and maximum LED load ratings before installation. For smart-home integration, a compatible Australian-rated smart trailing-edge dimmer switch (such as those in the SAL PIXIE range) can be used without rewiring at the ceiling.