SAL Frisbee SL2104/18TC/DP LED Oyster 8/12W 180mm Tri-CCT

Description

25mm thin. Recessed or surface. The compact 180mm Frisbee oyster.

The SAL Frisbee SL2104/18TC/DP is an 8W/12W dual-power non-dimmable LED oyster light with selectable colour temperature (3000K / 4000K / 6000K), a white opal polycarbonate diffuser, and IP44 moisture rating — designed for residential and commercial ceiling installations in living areas, bedrooms, hallways, bathrooms, laundries, and commercial spaces. At just 21mm high, the ultra-low profile Frisbee sits nearly flush with the ceiling. The 180mm diameter fitting with a flexible 80–100mm cut-out range installs as a recessed fitting in an existing ceiling opening or as a surface mount fitting on a flat ceiling — the smallest and most compact size in the Frisbee SL2104TC range.

• Power: 8W or 12W (selectable dual-power driver)
• Lumens at 12W: 780 lm (3000K) / 840 lm (4000K) / 840 lm (6000K)
• CCT: Selectable 3000K / 4000K / 6000K
• CRI: 80
• Beam Angle: 110°
• IP Rating: IP44
• Dimmable: No
• Body: White, opal polycarbonate diffuser
• Diameter: 180mm | Height: 21mm
• Mass: 0.26 kg
• Mounting: Recessed (80–100mm cut-out) or surface mount
• Double insulated

Important: Non-dimmable — do not connect to a wall dimmer. Set power (8W/12W) and CCT before installation with power OFF. Installation by a licensed electrician is required in accordance with AS/NZS 3000.

Fast shipping across Australia — order online now for quick dispatch.

Dual Power — 8W or 12W Selectable at Installation

The SL2104/18TC/DP's built-in driver lets the installer select either 8W economy or 12W full output before energising. At 12W full output, the fitting delivers up to 840 lm at 4000K across a 110° wide beam — well suited to hallways, ensuites, small bedrooms, and smaller commercial spaces. Economy 8W mode reduces running cost while maintaining the same 110° wide beam distribution. This is a fixed power selection at installation, not continuous dimming — the DP driver does not support wall dimmer connection. For the medium and large Frisbee sizes with more output, see the SL2104/22TC/DP (12W/18W, 220mm) and SL2104/30TC/DP (18W/25W, 300mm).

The Frisbee family — choosing the right size.

The SL2104TC/DP range covers three sizes. The SL2104/18TC/DP (this product) is 8W/12W with a 180mm diameter (780/840/840 lm, 21mm high, 80–100mm cut-out) — suited to hallways, ensuites, and smaller rooms. The SL2104/22TC/DP is 12W/18W with a 220mm diameter (1260/1350/1350 lm, 21mm high, 120–200mm cut-out) — suited to medium rooms and bathrooms. The SL2104/30TC/DP is 18W/25W with a 300mm diameter (1875/2000/2000 lm, 25mm high, 150–270mm cut-out) — suited to larger living areas. All three share the same IP44 rating, selectable CCT, dual-power driver, non-dimmable construction, and double insulation.

Q: Can I install the Frisbee SL2104/18TC/DP over my old ceiling rose cut-out?
A: If your existing ceiling opening is between 80mm and 100mm diameter, yes — the Frisbee will recess into the opening cleanly. For larger existing openings (e.g. old fluorescent oysters at 200–260mm), the 180mm Frisbee would be too small to cover the hole and you should use the SL2104/30TC/DP instead. Alternatively, the 18TC/DP can be surface mounted on a flat ceiling with no cut-out required.

Q: Is the Frisbee suitable for bathrooms?
A: Yes — IP44 meets the requirements for Zone 2 and general areas in Australian bathrooms under AS/NZS 3000. Confirm the specific zone requirements with your licensed electrician prior to installation.

Q: Can I connect this to a wall dimmer?
A: No — the DP variant has an integral non-dimmable dual-power driver. Connecting to a wall dimmer will cause flicker, buzzing, or driver damage. This fitting is for switched (non-dimming) circuits only.