Red Smoke R10RFP 10 Year Wireless Smoke Alarm 433.92 MHz Photoelectric

Description

Wireless 10-year protection, no wiring needed.

The Red Smoke R10RFP is a professional photoelectric smoke alarm powered by a sealed 10-year lithium battery, with wireless RF interconnect. It delivers long-term protection with no mains wiring and no battery changes, making it ideal for retrofits, rentals and renovations.

Key Features

• Type A photoelectric sensor – detects smouldering and open fires
• Sealed 10-year lithium battery, maintenance-free (no annual battery changes)
• Wireless RF interconnect only, up to 40 alarms (433.92 MHz)
• Test / hush button plus RF-pairing button
• 85 dB alarm at 3m (ISO 8201 pattern), approximately 8-second response
• Red LED for warning and low-battery indication
• 120mm twist base for quick installation
• Wireless range 30m line of sight, 100m free field
• Certified to AS 3786:2014+A1:2015+A2:2018 (CSIRO ActivFire)
• Approved for QLD Government Housing installation

Secure yours online for fast dispatch Australia-wide.

Battery-Powered, Wirelessly Connected

The R10RFP runs entirely on its sealed 10-year lithium battery, so there is no mains wiring to run and no batteries to replace over its life. When one alarm detects smoke, every wirelessly interconnected alarm sounds together, with up to 40 devices linked by radio frequency for whole-home coverage. That makes it a fast, low-disruption option for existing homes where running interconnect cable is impractical.

Built for Compliance

The R10RFP is certified to AS 3786:2014+A1:2015+A2:2018 and listed by CSIRO ActivFire (certificate afp-3903). Interconnected photoelectric alarms are central to Queensland's domestic smoke alarm legislation, and this alarm is approved for QLD Government Housing installation, making it a practical compliant choice for landlords and property managers. For best performance and compliance, installation should be carried out by a licensed electrician.

Q: How is the Red Smoke R10RFP powered?
A: By a sealed 10-year lithium battery. There is no mains connection, and the battery is not replaceable, so the whole alarm is replaced at end of life.

Q: How many R10RFP alarms can be interconnected?
A: Up to 40 alarms, wirelessly by radio frequency (433.92 MHz). The R10RFP interconnects wirelessly only; it is not hard-wired.

Q: Is the Red Smoke R10RFP compliant for Queensland homes?
A: It is a photoelectric, wirelessly interconnectable alarm certified to AS 3786:2014 and approved for QLD Government Housing installation. Always confirm placement and interconnection meet current requirements.

Warranty

Red Smoke Alarms – Manufacturer Warranty

Red Smoke Alarms are built to last and backed by a 10-year warranty for both residential and commercial use. Faults are rare, but if something does go wrong, support is just a call or click away.

To submit a warranty claim, you can either:

• Call Red Smoke Alarms on 1300 316 552, or

• Submit a claim online at: redsmokealarms.com.au/warranty

Red Smoke Alarms are supported by a national network of service agents ready to assist in the unlikely event of a fault.

Note: For the fastest resolution, contact Red Smoke Alarms directly. Warranty claims and repairs are handled exclusively by their team—not through Electrotraders.