Pro-Vision PVDL-COB131B 13W COB Downlight 3CCT Dimmable Black

Description

A focused COB beam in black. Three colours. One dimmable SKU.

The Pro-Vision PVDL-COB131B is a 13W COB LED downlight in a black finish, with full-range dimming and a tight 60-degree beam, built for directional light where a wide-flood fitting would spill in every direction. The black fascia suits darker and feature ceilings, while the single COB light source gives a crisp, concentrated output across three selectable colour temperatures, dimmable from 5 to 100 percent — a downlight for accenting and defined pools of light rather than blanket coverage.

Key Features

• 13W power draw, COB LED source
• Black fitting finish
• Narrow 60° beam angle
• Fully dimmable, 5-100% range
• 3CCT selectable: 3000K / 4000K / 6000K
• Output 1200lm (3000K) / 1300lm (4000K) / 1250lm (6000K)
• Adjustable 90-95mm cut-out range
• External driver
• IP44 rated
• CRI >80, Power Factor ≥0.9
• Input AC 200-240V, 50/60Hz
• >50,000 hour rated lifespan, 3-year warranty

Buy Online now for fast dispatch Australia-wide.

Why the COB Source and Narrow Beam Matter

Most downlights use SMD chips behind a wide diffuser to spread light broadly across a room. The PVDL-COB131B takes a different approach: a single COB (chip-on-board) light source paired with a 60-degree beam angle, which concentrates the output into a tighter, more directional cone. That makes it a fitting for accent and feature lighting — drawing light down onto a bench, a splashback, a hallway runner or a display area — rather than washing an entire room evenly. Where a 120-degree flood downlight would scatter light widely, the narrower 60-degree beam keeps it defined and purposeful. Note that this fitting uses an external driver, so allow room for the driver in the ceiling cavity alongside the fitting.

A Black Finish for Feature Ceilings

The black fascia is the practical point of difference on this variant. Against a dark, timber or feature ceiling, a black downlight trim blends in rather than standing out as a white ring, keeping the visual focus on the light itself rather than the fitting. It suits media rooms, feature walls and considered interior schemes where the ceiling is part of the design, and lets a run of downlights sit quietly within a darker surface.

Full-Range Dimming and Three Colours from One Fitting

The fitting dims across a wide 5 to 100 percent range, so the same downlight can run at full brightness for tasks and wind right down to a low ambient glow — a broader dimming span than many downlights offer, giving fine control over the mood of a space. The selectable 3CCT switch then sets warm 3000K, neutral 4000K or cool 6000K at the point of install. Warm 3000K suits living areas and bedrooms, neutral 4000K works well in kitchens and hallways, and cool 6000K gives a crisp, task-focused light. One part number therefore covers a range of rooms and preferences. For a comparable dimmable tri-colour option in an Australian brand, the SAL ECOGEM downlight range sits alongside this fitting.

Built for Everyday Service and Some Moisture

A rated life beyond 50,000 hours means the PVDL-COB131B is designed to keep going with minimal maintenance — fewer change-outs over the life of the installation, which matters as much in a rental portfolio or commercial fit-out as it does at home. A CRI above 80 renders colours accurately for everyday residential and commercial spaces, which suits the fitting to accent roles where how things look under the light is the whole point. The IP44 ingress rating means the fitting is protected against solid objects and against water splashing from any direction, suiting it to areas that see some moisture in normal use. The compact 102mm fixture diameter drops into a 90-95mm ceiling cut-out. Backed by a 3-year warranty.

Q: Is the Pro-Vision PVDL-COB131B dimmable, and across what range?
A: Yes. It dims across a wide 5 to 100 percent range, so it can run at full brightness or wind down to a low ambient level. Use a compatible LED dimmer and check the dimmer's load rating.

Q: What size ceiling hole does the PVDL-COB131B fit?
A: It has an adjustable cut-out range of 90 to 95mm, so it fits any ceiling opening within that span. The overall fixture diameter is 102mm.

Q: Is this downlight available in white as well as black?
A: This is the black-finish version. A white-finish model with identical specifications is also available if a white trim suits the ceiling better.