Transco P2DWSO Neptune Double Pole Double Power Point Neon 10A IP65

Description

**OUT OF STOCK UNTIL AUGUST 2026**

ALTERNATIVES ARE:

• P2DWSO/B 10AMP BLACK
• P2DWSO/15 15AMP WHITE
• P2DWSOB/15 15AMP BLACK

IP65 Weatherproof Power. Double Pole. Neon. The Original Neptune.

The Transco Neptune P2DWSO is the original style IP65 double pole double outlet weatherproof power point with neon indicators — the first generation of the award-winning Neptune slim weatherproof range that redefined outdoor and wet area power points in Australia. Rated at 10A and 240V AC, it uses the same patented polychloroprene inlet membrane technology as the current P2DWS to achieve IP65 without a plug inserted and without requiring a lid. Electrical white, flush mount, sold as a complete unit.

• Transco Neptune series — IP65 original style weatherproof double pole power point
• Electrical white UV-stabilised impact-resistant polycarbonate
• 2 x double pole switched 240V AC socket outlets — 10A rated
• IP65 without plug inserted — IP54 with plug inserted
• IP65 achieved without a lid — no hinged cover required
• Patented inlet membrane technology — polychloroprene gasket
• Neon power indicator on each outlet
• Double pole switching — isolates both active and neutral on each outlet
• Neoprene protected switch
• Rear gasket seal
• UV stabilised — rated -20°C to +50°C
• Flush mount — standard flush mount installation
• Australian Good Design Award winner
• Listed in Transco RV Accessories range
• AU/NZ Approval: N25697
• Compliant with AS/NZS 3100, AS/NZS 3112, AS/NZS 3133 and AS 60529

Order online now for fast dispatch Australia-wide.

The Neptune That Started It All — Original Style IP65 Weatherproof Power

The P2DWSO is the original style Neptune — the power point that introduced IP65 weatherproof performance to the Australian slim flush-mount format and earned Transco the Australian Good Design Award. Using the same patented polychloroprene inlet membrane technology as the current P2DWS, the P2DWSO achieves IP65 without a plug inserted and without any lid, maintaining IP54 with a plug inserted. The double pole switching isolates both active and neutral conductors simultaneously on each outlet — meeting the mandatory requirement for mobile structures and caravans under Australian wiring rules.

The neon power indicators on each outlet are the practical fault identification feature that sets the Neptune apart from standard weatherproof power points — no neon in on mode means a supply side fault, neon on with no appliance means an appliance fault. The neoprene protected switch and rear gasket seal provide weatherproof integrity at every potential ingress point, working alongside the patented inlet membrane at the socket face. UV-stabilised polycarbonate handles outdoor exposure across -20°C to +50°C without degrading.

The P2DWSO is the original style variant in the Transco Neptune weatherproof power point range. The current slim style P2DWS shares the same fundamental technology and approval but presents a different physical format. Both carry AU/NZ Approval N25697 and the Good Design Award recognition. The P2DWSO is the flush mount original style — suited to applications where the original Neptune form factor is specified or required.

Q: What is the difference between the P2DWSO and the P2DWS?
A: The P2DWSO is the original style Neptune and the P2DWS is the current slim style Neptune. Both are IP65 double pole double outlet weatherproof power points with neon indicators, patented inlet membrane technology, and the same AU/NZ approval N25697. The key difference is the physical format — the P2DWSO is the original style form factor and the P2DWS is the current slimline version. Both achieve IP65 without a plug inserted and without a lid.

Q: Is the Transco P2DWSO really IP65 without a lid?
A: Yes. The P2DWSO achieves IP65 without plugs inserted and without any lid, using the patented polychloroprene inlet membrane technology tested per AS 60529 by an ILAC MRA accredited laboratory in Australia. With a plug inserted, the rating is IP54.

Q: Is the Transco Neptune P2DWSO suitable for caravan and RV installations?
A: Yes. The P2DWSO is listed in the Transco RV Accessories range. Its double pole switching meets the isolation requirement for mobile structures under Australian wiring rules, and the IP65 rating without a plug inserted makes it suitable for both internal and external installation on caravans, motorhomes, and site sheds.