Double Pole Double Power Point 10 Amp - Black | P2D/B Powerclip

Description

Double Pole Power. Built for Safety. Finished in Black.

The Transco Powerclip P2D/B is a double pole double outlet GPO power point rated at 10A and 240V AC in black — delivering the same complete active and neutral isolation as the standard P2D in a bold, contemporary finish. Two fully switched double pole outlets in a single standard-size Powerclip plate. Suited for residential, commercial, and mobile applications including caravans and recreational vehicles.

• Transco Powerclip series — double pole double outlet power point
• Black impact-resistant polycarbonate construction
• 2 x double pole switched 240V AC socket outlets — 10A rated
• Double pole switching — isolates both active and neutral on each outlet
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W117 mm x L72 mm x D20 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Suits flush and surface mount installations
• Fits all general mounting brackets and flanges on the market
• Listed in Transco RV Accessories range
• Also available in 10A white (P2D), 15A white (P2D15), and beige (P2D/BG)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Why Double Pole Matters and Where the P2D/B Fits

A double pole power point disconnects both the active and neutral conductors simultaneously when switched off — providing true isolation of any connected appliance from the mains supply. This is not just best practice; it is a mandatory requirement in a wide range of Australian applications. Caravans, motorhomes, food trucks, site sheds, mobile classrooms, and any other structure where power is connected and disconnected dynamically must use double pole switching under Australian wiring rules. The P2D/B delivers that compliance in the familiar slim Powerclip format with a sharp black finish.

The black polycarbonate construction is durable, UV-stable, and impact-resistant — matching the full Powerclip black range in build quality and finish. Whether it's a residential kitchen, a commercial fit-out with a dark colour specification, or a caravan interior where aesthetics matter as much as compliance, the P2D/B provides the right solution without compromise. The rocker switch on each outlet gives clear visual indication of the switched state across both gang positions.

At W117 x L72 x D20mm with an 84mm fixing centre, the P2D/B fits standard Australian wall boxes and all general flush mounting brackets and surface mounting flanges on the market. The slim 20mm depth keeps the installation profile low against the wall surface — identical form and fit to the white P2D, just in black.

Q: Why is a double pole power point required in caravans and recreational vehicles?
A: Australian wiring rules require double pole switching in caravans, motorhomes, and other mobile structures because power is regularly connected and disconnected at the inlet. Double pole switching ensures both the active and neutral conductors are isolated when the outlet is switched off, protecting occupants and appliances from electrical hazards.

Q: What is the difference between the P2D and the P2D/B?
A: The P2D and P2D/B are identical in electrical specification — both are double pole double outlet Powerclip power points rated at 10A and 240V AC. The only difference is the finish: the P2D is electrical white and the P2D/B is black.

Q: Is the Transco P2D/B suitable for both flush and surface mount installations?
A: Yes. The P2D/B fits all standard Australian wall boxes and general flush mounting brackets, as well as general surface mounting flanges, making it suitable for both flush and surface mount installations.