Transco P1D/B Powerclip Single Power Point Double Pole 10A 240V Black

Description

Single Outlet. Full Double Pole Isolation. Finished in Black.

The Transco Powerclip P1D/B is a double pole single outlet GPO power point rated at 10A and 240V AC in black — delivering the same complete active and neutral isolation as the standard P1D in a bold, contemporary finish. One fully switched double pole outlet in a standard-size Powerclip plate. Suited for residential, commercial, and mobile applications including caravans and recreational vehicles where a darker aesthetic is specified.

• Transco Powerclip series — double pole single outlet power point
• Black impact-resistant polycarbonate construction
• 1 x double pole switched 240V AC socket outlet — 10A rated
• Double pole switching — isolates both active and neutral simultaneously
• Rocker switch on outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W117 mm x L72 mm x D20 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Suits flush and surface mount installations
• Fits all general mounting brackets and flanges on the market
• Listed in Transco RV Accessories range
• Also available in 10A white (P1D), 15A white (P1D15), and beige (P1D/BG)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where Single Outlet Double Pole Switching Meets a Contemporary Black Finish

The P1D/B delivers the full double pole isolation of the P1D in a black finish — making it the natural specification for black Powerclip installations where a single dedicated outlet is required. Both the active and neutral conductors are isolated simultaneously when the switch is off, meeting the double pole standard required across caravans, motorhomes, site sheds, and a wide range of commercial and fixed appliance installations under Australian wiring rules. The black polycarbonate finish is durable, UV-stable, and impact-resistant — consistent with the full Powerclip black range in build quality and aesthetics.

The rocker switch gives clear visual indication of the switched state — on or off — which is particularly useful for fixed appliance connections where the outlet serves a specific piece of equipment and safe isolation needs to be immediately obvious. The black finish makes the P1D/B the natural pairing for black mounting blocks and flanges, keeping the installation consistent and intentional from plate to wall surface. The copper ferrule connectors accommodate cable up to 2.5mm x 3, covering standard Australian wiring sizes used throughout residential and commercial installations.

At W117 x L72 x D20mm with an 84mm fixing centre, the P1D/B fits standard Australian wall boxes and all general flush mounting brackets and surface mounting flanges on the market. It is listed in the Transco RV Accessories range — single outlet double pole power points in black are increasingly specified in caravan and motorhome fit-outs where a coordinated dark interior aesthetic is part of the brief alongside full electrical compliance. Also available in 10A white (P1D), 15A white (P1D15), and beige (P1D/BG).

Q: What is the difference between the P1D and the P1D/B?
A: The P1D and P1D/B are identical in electrical specification — both are double pole single outlet Powerclip power points rated at 10A and 240V AC with the same dimensions and fixing centres. The only difference is the finish: the P1D is electrical white and the P1D/B is black.

Q: Is the Transco P1D/B suitable for caravan and RV installations?
A: Yes. The P1D/B is listed in the Transco RV Accessories range. Its double pole switching meets the requirement for complete active and neutral isolation in caravan, motorhome, and recreational vehicle 240V installations under Australian standards.

Q: Is the Transco P1D/B suitable for both flush and surface mount installations?
A: Yes. The P1D/B fits all standard Australian wall boxes and general flush mounting brackets, as well as general surface mounting flanges, making it suitable for both flush and surface mount installations.