Double Pole Single Power Point 10 Amp | P1D Powerclip

Description

Single Outlet. Full Double Pole Isolation. Built for Australia.

The Transco Powerclip P1D is a double pole single outlet GPO power point rated at 10A and 240V AC — the compact single-socket solution for installations where complete isolation of both active and neutral conductors is required at the point of use. One fully switched double pole outlet in a standard-size Powerclip plate, in electrical white. Suited for residential, commercial, and mobile applications including caravans and recreational vehicles.

• Transco Powerclip series — double pole single outlet power point
• Electrical white impact-resistant polycarbonate construction
• 1 x double pole switched 240V AC socket outlet — 10A rated
• Double pole switching — isolates both active and neutral simultaneously
• Rocker switch on outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W117 mm x L72 mm x D20 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Suits flush and surface mount installations
• Fits all general mounting brackets and flanges on the market
• Listed in Transco RV Accessories range
• Also available in 15A (P1D15), black (P1D/B), and beige (P1D/BG)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where Single Outlet Double Pole Switching Is the Right Specification

The P1D answers the requirement for full double pole isolation in locations where only one socket outlet is needed — a fixed appliance connection, a single equipment power point, or any installation where a double outlet would be oversized for the application. Both the active and neutral conductors are isolated simultaneously when the switch is off, meeting the double pole standard required across caravans, motorhomes, site sheds, and a wide range of commercial and fixed appliance installations under Australian wiring rules.

The rocker switch gives clear visual indication of the switched state — on or off — which is particularly useful for fixed appliance connections where the outlet serves a specific piece of equipment and safe isolation needs to be immediately obvious. The copper ferrule connectors accommodate cable up to 2.5mm x 3, covering standard residential and light commercial wiring sizes used throughout Australian installations. The slim 20mm depth keeps the installation profile low against the wall surface.

At W117 x L72 x D20mm with an 84mm fixing centre, the P1D fits standard Australian wall boxes and all general flush mounting brackets and surface mounting flanges on the market. It is listed in the Transco RV Accessories range — single outlet double pole power points are a common specification in caravan and motorhome installations where individual appliances need dedicated, safely isolated socket positions. Also available in 15A (P1D15), black (P1D/B), and beige (P1D/BG).

Q: When would I specify a single outlet double pole power point like the P1D instead of a double outlet P2D?
A: The P1D is the right specification when only one socket outlet is needed at a location — for example, a dedicated fixed appliance connection, a single equipment power point in a caravan, or any installation where a double outlet would provide more sockets than required. The double pole switching on the P1D provides the same safe isolation as the P2D, just with one outlet position.

Q: Is the Transco P1D suitable for caravan and RV installations?
A: Yes. The P1D is listed in the Transco RV Accessories range. Its double pole switching meets the requirement for complete active and neutral isolation in caravan, motorhome, and recreational vehicle 240V installations under Australian standards.

Q: Is the Transco P1D available in other colours and amp ratings?
A: Yes. The P1D is the 10A white variant. It is also available as P1D15 (15A white), P1D/B (10A black), and P1D/BG (10A beige) to suit different installation requirements and aesthetic specifications.