Double Pole Double Power Point 10 Amp | P2D Powerclip

Description

Double Pole Power. Built for Safety. Built for Australia.

The Transco Powerclip P2D is a double pole double outlet GPO power point rated at 10A and 240V AC — the standard choice for Australian installations where complete isolation of both active and neutral conductors is required at the socket. Two fully switched double pole outlets in a single standard-size Powerclip plate, in electrical white. Suited for residential, commercial, and mobile applications including caravans and recreational vehicles.

• Transco Powerclip series — double pole double outlet power point
• Electrical white impact-resistant polycarbonate construction
• 2 x double pole switched 240V AC socket outlets — 10A rated
• Double pole switching — isolates both active and neutral on each outlet
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W117 mm x L72 mm x D20 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Suits flush and surface mount installations
• Fits all general mounting brackets and flanges on the market
• Listed in Transco RV Accessories range
• Also available in 15A (P2D15), black (P2D/B), and beige (P2D/BG)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Why Double Pole Matters and Where the P2D Fits

A double pole power point disconnects both the active and neutral conductors simultaneously when switched off — providing true isolation of any connected appliance from the mains supply. This is not just best practice; it is a mandatory requirement in a wide range of Australian applications. Caravans, motorhomes, food trucks, site sheds, mobile classrooms, and any other structure where power is connected and disconnected dynamically must use double pole switching under Australian wiring rules. The P2D delivers that compliance in the familiar, slim Powerclip format.

The rocker switch on each outlet gives clear visual indication of the switched state — on or off — which is particularly useful in commercial and mobile environments where multiple appliances are connected and staff or users need to manage power points safely. The copper ferrule connectors accommodate cable up to 2.5mm x 3, covering standard residential and light commercial wiring sizes used throughout Australian installations.

At W117 x L72 x D20mm with an 84mm fixing centre, the P2D fits standard Australian wall boxes and all general flush mounting brackets and surface mounting flanges on the market. The slim 20mm depth keeps the installation profile low against the wall surface. Also available in 15A rating (P2D15), black (P2D/B), and beige (P2D/BG) to suit different installation requirements and aesthetic specifications.

Q: Why is a double pole power point required in caravans and recreational vehicles?
A: Australian wiring rules require double pole switching in caravans, motorhomes, and other mobile structures because power is regularly connected and disconnected at the inlet. Double pole switching ensures both the active and neutral conductors are isolated when the outlet is switched off, protecting occupants and appliances from electrical hazards.

Q: What is the difference between the P2D and a standard single pole power point?
A: A standard single pole power point only switches the active conductor. The P2D switches both the active and neutral conductors simultaneously (double pole), providing complete isolation of the connected appliance from the mains supply when switched off.

Q: Is the Transco P2D available in other amp ratings and colours?
A: Yes. The P2D is the 10A white variant. It is also available as P2D15 (15A white), P2D/B (10A black), and P2D/BG (10A beige) to suit different installation requirements and aesthetic preferences.