Double Pole Single Power Point Deep Mount | P1DD Transco

Description

Single Outlet. Double Pole. Deep Mount. Built for Plaster Wall Installations.

The Transco Powerclip P1DD is a double pole single outlet GPO power point with a deep mounting base — rated at 10A and 240V AC and specifically designed for flush mounting in rendered plaster and masonry walls where a deeper wall recess is required. One fully switched double pole outlet in electrical white, with 60mm fixing centres to suit plaster brackets. Listed in the Transco RV Accessories range.

• Transco Powerclip series — double pole single outlet power point, deep base
• Electrical white impact-resistant polycarbonate construction
• 1 x double pole switched 240V AC socket outlet — 10A rated
• Double pole switching — isolates both active and neutral simultaneously
• Rocker switch on outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W72 mm x L72 mm x D20 mm
• Fixing centres: 60 mm — suits plaster brackets
• Horizontal wall mounting
• Flush mount only — fits all plaster brackets on the market
• Listed in Transco RV Accessories range
• Also available in black (P1DD/B) and beige (P1DD/BG)
• Double outlet version available — P2DD (95mm fixing centres)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where the Deep Mount P1DD Is the Correct Specification

The P1DD solves a specific installation challenge — flush mounting a double pole single outlet power point in a rendered plaster or masonry wall where the wall recess depth requires a deeper base than the standard P1D provides. The deep base accommodates more cable bulk behind the plate in masonry installations where conduit and cable runs often require additional clearance. The 60mm fixing centres are matched to the plaster bracket format used in single outlet positions in these wall types, making the P1DD the correctly specified product where the standard P1D simply will not fit the bracket pattern.

Double pole switching on the outlet means both the active and neutral conductors are isolated when the switch is off — providing safe, compliant isolation meeting the double pole standard required across caravans, motorhomes, and a wide range of commercial and fixed appliance installations under Australian wiring rules. The single outlet format is the right specification where only one dedicated socket position is required at the location — a fixed appliance connection, a single equipment power point, or any installation where a double outlet would be oversized.

The P1DD is flush mount only — it fits all plaster brackets available on the Australian market but is not compatible with standard surface mounting flanges due to its 60mm fixing centres. For surface mount applications, the standard P1D (84mm fixing centres) is the correct specification. For double outlet deep base requirements, the P2DD (95mm fixing centres) is the equivalent double outlet option. Also available in black (P1DD/B) and beige (P1DD/BG).

Q: What is the difference between the P1DD and the standard P1D?
A: The P1DD is the deep base variant of the standard P1D double pole single outlet power point. The key differences are the fixing centres — 60mm on the P1DD versus 84mm on the P1D — and the mounting method. The P1DD is designed for flush mounting in plaster brackets in rendered and masonry walls. The standard P1D has 84mm fixing centres and suits both flush mounting brackets and surface mounting flanges.

Q: What is the difference between the P1DD and the P2DD?
A: The P1DD is the single outlet deep base variant (W72mm, 60mm fixing centres) and the P2DD is the double outlet deep base variant (W117mm, 95mm fixing centres). Both are flush mount only and suit plaster brackets. Choose the P1DD where one socket position is required and the P2DD where two socket positions are needed.

Q: Can the P1DD be surface mounted?
A: No. The P1DD has 60mm fixing centres and is designed for flush mounting using plaster brackets only. For surface mount installations, the standard P1D (84mm fixing centres) is the correct specification as it suits all general surface mounting flanges available on the Australian market.