Transco P2N Powerclip Narrow Skirting Double Power Point 10A 240V

Description

Double Outlet Power. Skirting Slim. Neat Where It Counts.

The Transco Powerclip P2N is a narrow-body double outlet skirting power point rated at 10A and 240V AC — purpose-built for installations along skirting boards, in furniture cavities, and any location where a standard-width power point simply won't fit. At just 43mm wide, it slips into tight spaces cleanly without sacrificing functionality. Two switched 240V AC outlets in electrical white, sold as a complete unit.

• Transco Powerclip series — narrow body double outlet skirting power point
• Electrical white impact-resistant polycarbonate construction
• 2 x switched 240V AC socket outlets — 10A rated
• Single pole switching
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W43 mm x L154 mm x D20 mm
• Horizontal wall mounting
• Suits skirting board, furniture, and narrow cavity installations
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Why the P2N Is the Right Power Point for Narrow and Skirting Installations

Standard power points are typically 72mm wide — far too wide for skirting board channels, furniture recesses, kitchen plinths, and similar narrow installation locations. The P2N solves that problem directly with a 43mm wide profile that fits where standard plates cannot. Two 10A outlets in a single slim plate means the location provides full dual-outlet functionality without requiring additional wall space or a wider cutout. It's the practical, compliant solution for locations where layout and space constraints drive the specification.

The narrow 43mm width and 154mm length give the P2N its distinctive skirting board profile — long and slim rather than the standard square format. The depth of 20mm keeps the installation flush and unobtrusive against the wall surface. The moulded polycarbonate construction is impact-resistant and durable, consistent with the full Powerclip range in build quality and finish. The rocker switch on each outlet provides clear indication of the switched state across both outlet positions.

The P2N is the double outlet variant in the Transco narrow skirting power point range — the single outlet version (P1N, W43 x L93 x D20mm) is available for locations where only one socket position is required. Both variants share the same 43mm width and Powerclip series construction, making them straightforward to specify across a consistent narrow-profile installation.

Q: What makes the Transco P2N different from a standard Powerclip power point?
A: The P2N has a narrow body width of just 43mm compared to the standard 72mm Powerclip power point width. This slim skirting profile is specifically designed for installation along skirting boards, in furniture recesses, kitchen plinths, and other narrow locations where a standard-width power point will not fit.

Q: Is the Transco P2N suitable for skirting board installations?
A: Yes. The P2N is specifically designed for skirting board and narrow cavity installations. Its 43mm width and horizontal mounting orientation allow it to sit neatly along a skirting board channel or within a furniture recess where standard power points cannot be installed.

Q: What are the dimensions of the Transco P2N double outlet skirting power point?
A: The P2N measures W43mm x L154mm x D20mm. The slim 43mm width is what defines its skirting board application — approximately 40% narrower than a standard Powerclip power point plate.