Transco P1N Powerclip Narrow Skirting Single Power Point 10A 240V

Description

Single Outlet Power. Skirting Slim. Neat Where It Counts.

The Transco Powerclip P1N is a narrow-body single outlet skirting power point rated at 10A and 240V AC — purpose-built for installations along skirting boards, in furniture cavities, and any location where a standard-width power point simply won't fit and only one socket position is required. At just 43mm wide, it slips into tight spaces cleanly without sacrificing functionality. One switched 240V AC outlet in electrical white, sold as a complete unit.

• Transco Powerclip series — narrow body single outlet skirting power point
• Electrical white impact-resistant polycarbonate construction
• 1 x switched 240V AC socket outlet — 10A rated
• Single pole switching
• Rocker switch on outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W43 mm x L93 mm x D20 mm
• Horizontal wall mounting
• Suits skirting board, furniture, and narrow cavity installations
• Also available as double outlet (P2N — W43 x L154 x D20mm)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Why the P1N Is the Right Power Point for Narrow and Skirting Installations

Standard power points are typically 72mm wide — far too wide for skirting board channels, furniture recesses, kitchen plinths, and similar narrow installation locations. The P1N solves that problem directly with a 43mm wide profile that fits where standard plates cannot. One 10A outlet in a compact slim plate means the location provides full single-outlet functionality without requiring a wider cutout or additional wall space. At W43 x L93 x D20mm it is the most compact solution in the Transco narrow skirting range — significantly shorter than the double outlet P2N (L154mm) and ideal wherever a single socket is all that's needed.

The narrow 43mm width and 93mm length give the P1N its distinctive skirting board profile — long and slim rather than the standard square format. The depth of 20mm keeps the installation flush and unobtrusive against the wall surface. The moulded polycarbonate construction is impact-resistant and durable, consistent with the full Powerclip range in build quality and finish. The rocker switch on the outlet provides clear indication of the switched state.

The P1N is the single outlet variant in the Transco narrow skirting power point range — the double outlet version (P2N, W43 x L154 x D20mm) is available for locations where two socket positions are required. Both variants share the same 43mm width and Powerclip series construction, making them straightforward to specify and install alongside each other across a consistent narrow-profile installation.

Q: What makes the Transco P1N different from a standard Powerclip power point?
A: The P1N has a narrow body width of just 43mm compared to the standard 72mm Powerclip power point width. This slim skirting profile is specifically designed for installation along skirting boards, in furniture recesses, kitchen plinths, and other narrow locations where a standard-width power point will not fit.

Q: What is the difference between the P1N and the P2N?
A: The P1N is the single outlet variant (W43 x L93 x D20mm) and the P2N is the double outlet variant (W43 x L154 x D20mm). Both share the same 43mm narrow width and Powerclip series construction. The P1N is the right choice where only one socket position is required at the skirting board location.

Q: Is the Transco P1N suitable for furniture and kitchen plinth installations?
A: Yes. The P1N's 43mm narrow profile makes it suitable for furniture recesses, kitchen plinths, under-bench cavities, and skirting board channels where a standard-width power point cannot be installed. Its single outlet format keeps the footprint as compact as possible in these space-constrained locations.