SSF2.5Transco TransFast Quick Connect Socket for 2.5mm Cable

Description

No Tools. Push In. Done. FastConnect Surface Socket for 2.5mm Cable.

The Transco SSF2.5 is a FastConnect quick wiring surface socket rated at 10A and 240V AC — a complete surface mount socket with backing plate that eliminates traditional ferrule terminal wiring in favour of a push-in cam-lock quick connection system. Compatible with 2.5mm double insulation cable — the standard cable size for power circuit runs. Electrical white polycarbonate construction. Australian approval SAA120442EA. Sold individually.

• Transco FastConnect series — quick wiring surface socket
• Electrical white impact-resistant polycarbonate construction
• Rated 10A at 240V AC, 50Hz
• 3 pin flat earth configuration (active, neutral, earth)
• FastConnect push-in quick wiring — no ferrule terminal screwing required
• Copper ferrule x3 — cam-lock push-in connection
• Cable: 2.5mm double insulation cable
• Complete housing with backing plate
• Surface mounted — mounts with screws
• Mounting centre: 50 mm
• Dimensions: W50 mm x L65 mm x D60 mm
• Australian approval: SAA120442EA
• Also available for 1.5mm cable (SSF1.5)
• Compliant with AS 3100, AS/NZS 3112, AS 3109, AS/NZS 3122

Order online now for fast dispatch Australia-wide.

Why FastConnect Changes How Surface Sockets Are Wired — Now for Power Circuit Cable

Traditional surface socket wiring requires stripping the cable, inserting conductors into ferrule terminals, and screwing each terminal down individually — a process that is time consuming, requires a screwdriver, and needs careful attention to ensure each conductor is correctly seated and torqued. The Transco FastConnect SSF2.5 eliminates all of that. The push-in cam-lock connection system accepts the stripped 2.5mm cable conductor directly — push it in, lock it, done. No screwdriver. No terminal screws. No torque concerns. The same secure electrical connection in a fraction of the time.

The SSF2.5 is specifically optimised for 2.5mm double insulation cable — the standard cable size for Australian power circuit runs including general purpose outlets and surface socket power positions in residential and commercial installations. At 2.5mm, the cable is heavier and stiffer than 1.5mm lighting cable, making the push-in connection system an even more practical time-saver compared to the fiddly terminal screwing process typically required for thicker conductors. The complete housing and backing plate are supplied together as a single unit.

The SSF2.5 is the 2.5mm cable variant in the Transco FastConnect surface socket range. The SSF1.5 is available for 1.5mm double insulation cable where a lighter gauge cable is specified. The FastConnect range also includes quick-wire power points, switches, cable joiners, and wire connectors — all using the same push-in connection technology for consistent, fast installation across a complete wiring job. Australian approval SAA120442EA. Sold individually.

Q: How does the Transco SSF2.5 FastConnect wiring system work?
A: The SSF2.5 uses a push-in cam-lock connection system. The cable conductor is stripped to the required length, inserted into the connection point, and locked in place with a cam-lock action — no screwdriver or terminal screws are required. The connection is secure, reliable, and significantly faster than traditional ferrule terminal wiring, meeting Australian wiring standards AS 3100 and AS/NZS 3112.

Q: What cable does the Transco SSF2.5 accept?
A: The SSF2.5 is designed for 2.5mm double insulation cable — the standard cable size for Australian power circuit surface socket runs. For 1.5mm double insulation cable, the SSF1.5 variant is the correct specification. Confirm the installed cable size before ordering to ensure the correct FastConnect variant is specified.

Q: What is the difference between the SSF1.5 and the SSF2.5?
A: The SSF1.5 and SSF2.5 are identical in dimensions, mounting centre, rating, housing, and connection system. The only difference is the cable size — the SSF1.5 suits 1.5mm double insulation cable and the SSF2.5 suits 2.5mm double insulation cable. Always match the socket variant to the installed cable size.