Transco SSF 3 Pin Flush Base Surface Socket 10A 240V White

Description

Flush Base Socket. Compact. Clean. Recessed Mount Ready.

The Transco SSF is a 3 pin flush base surface socket rated at 10A and 240V AC — a compact, recessed-mount single outlet socket in electrical white for general surface wiring applications. At W65 x L65 x D13mm with a 50mm mounting centre, the SSF provides a clean, low-profile socket position that sits flush against the surface without protruding. Accepts cables up to 2.5mm x 4 via screwing copper ferrule terminals. Sold individually.

• Transco — 3 pin flush base surface socket, single outlet
• Electrical white impact-resistant polycarbonate construction
• Rated 10A at 240V AC, 50Hz
• 3 pin flat earth configuration (active, neutral, earth)
• Screwing copper ferrule terminals
• Cable accommodation: 1.5/2.5mm x 4
• Recessed mounting — mounts with screws
• Mounting centre: 50 mm
• Dimensions: W65 mm x L65 mm x D13 mm
• Suits general surface wiring applications

Order online now for fast dispatch Australia-wide.

Where the SSF Flush Base Socket Fits in Surface Wiring Installations

The SSF flush base socket is the compact, low-profile surface socket solution for applications where a standard power point is not the right fit but a reliable, cleanly mounted socket outlet is required. At just 13mm deep and 65 x 65mm in footprint with a 50mm mounting centre, the SSF is particularly suited to furniture wiring, under-bench socket positions, equipment enclosures, display cabinets, and any surface wiring application where the socket needs to sit flush against a panel or surface without significant protrusion.

The screwing copper ferrule terminals accommodate cable from 1.5mm to 2.5mm x 4 conductors — covering the standard flexible and fixed wiring cable sizes used in Australian surface wiring applications. The compact square footprint and minimal 13mm depth mean the SSF can be installed in locations where standard power point plates or extension sockets would be oversized or too deep. The recessed mount format and 50mm mounting centre are specific to this product — confirm the available mounting space before installation.

The SSF is a single outlet surface socket. For installations requiring a double outlet surface socket, the Transco range includes the Surface Socket Double Outlet 10A. A round earth pin variant (SSF with round earth) is also available from the Transco range for applications where a round earth socket is required. Sold individually — specify the quantity needed for the installation.

Q: What is the difference between the Transco SSF and a standard extension socket (ES)?
A: The SSF is a fixed surface socket — it is permanently mounted to the surface at the installation point and wired to a fixed cable run. The ES extension socket is a rewireable component that forms the appliance end of an extension lead. The SSF is the right choice for fixed socket positions in surface wiring installations; the ES is the right choice for portable extension lead assembly.

Q: What cable sizes does the Transco SSF accept?
A: The SSF accepts cable from 1.5mm to 2.5mm x 4 conductors via screwing copper ferrule terminals. This covers both standard flexible cable and fixed TPS wiring cable sizes used in Australian surface socket installations.

Q: What mounting centre does the Transco SSF use?
A: The SSF has a 50mm mounting centre — different from the standard 84mm fixing centres used by Powerclip power points and wall plates. Confirm the available mounting dimensions at the installation point before specifying the SSF, as it will not align with standard wall box or GPO bracket hole patterns.