SAL Vintage Deco LST21WW LED Filament Lamp 8W B22 - Dimmable Warm White

Description

Vintage filament warmth. LED efficiency. Dimmable from day one.

The SAL Vintage Deco LST21WW/B22D/C is an 8W dimmable LED filament lamp with a clear glass body, B22 bayonet base, fixed 3000K Warm White colour temperature, and 1050 lm output across a 320° near-omnidirectional beam angle. Designed for decorative interior lighting where the vintage filament aesthetic is part of the design, it retrofits directly into existing B22 bayonet pendant fittings, chandelier arms, exposed-bulb sconces, and decorative lampholders — with an integral trailing-edge dimmable driver and no wiring changes required.

• Power: 8W, 240V AC, 50Hz
• Lumens: 1050 lm
• CCT: 3000K Warm White (fixed — not selectable)
• CRI: >80
• Beam Angle: 320°
• Base: B22 bayonet cap
• Dimmable: Yes — Trailing Edge
• Body: Clear glass
• Diameter: 64mm | Length: 140mm
• IP Rating: IP20 (interior dry-location use only)
• Warranty: 1 year residential / 1 year commercial

Fast shipping across Australia — order online now for quick dispatch.

The Vintage Filament Look — Without the Running Cost

The LST21WW/B22D/C replicates the warm, amber glow of traditional Edison-style incandescent filament bulbs using modern LED filament technology. The clear glass body leaves the decorative LED filament fully visible, delivering the distinctive warm point-source light that makes vintage filament lamps a favourite for Australian restaurants, cafes, bars, hotel lobbies, pendant clusters, and residential interiors where the light fitting itself is part of the decor. At 8W delivering 1050 lm, it replaces a typical 40–60W incandescent filament lamp with the same warm aesthetic at a fraction of the energy cost — and without the constant bulb replacement that incandescents demand.

320° near-omnidirectional beam — essential for decorative applications.

The 320° beam angle delivers light in all directions, including upward and around the fitting — just like a traditional incandescent globe. This is critical for pendant clusters, chandeliers, and decorative sconces where the lamp is visible from multiple angles and light spill around the fitting is part of the design intent. A directional 60° or 100° downlight lamp would leave the upper and side portions of a pendant or chandelier unlit, destroying the decorative effect.

Dimmable — the feature that makes filament lamps come alive.

The integral trailing-edge dimmable driver is what separates this lamp from a non-dimmable decorative LED. Dimming is central to the vintage filament effect — at 20–50% brightness in a restaurant, bar, or living-room pendant cluster, the warm amber glow intensifies and the filament becomes more prominent. The driver is compatible with most modern Australian LED-rated trailing-edge wall dimmers, including Clipsal Iconic Dimmable, HPM, Mercator, and Legrand. Always confirm your dimmer is a trailing-edge LED-rated type — older leading-edge incandescent dimmers may cause flicker or buzzing. Also check the dimmer's minimum load rating, as a single 8W lamp may fall below some dimmers' minimum LED load threshold.

Q: Will the LST21WW/B22D/C fit my existing pendant fitting?
A: If your fitting accepts a B22 bayonet-base lamp, yes. The lamp is 64mm in diameter and 140mm in length — confirm these dimensions fit within your fitting's opening or shade. For exposed-bulb pendant fittings with no shade, any standard B22 lampholder will accept this lamp.

Q: What are the LST21 siblings?
A: The LST21 Vintage Deco Dimmable range has two CCT options in both B22 and E27 bases: LST21WW/B22D/C (this product) — 3000K Warm White, B22; LST21NDL/B22D/C — 5000K Neutral Daylight, B22; LST21WW/E27D/C — 3000K Warm White, E27; LST21NDL/E27D/C — 5000K Neutral Daylight, E27. All are 8W, 1050 lm, 320°, trailing-edge dimmable.

Q: Why is the warranty only 1 year?
A: Glass LED filament lamps have a shorter published warranty than standard LED downlights because the clear glass body and visible filament construction is inherently more delicate. SAL publishes 1 year residential and 1 year commercial for this range — this is typical for decorative glass filament LED lamps across the industry.