SAL LT Series LT409TC LED Tubular Lamp 9W B22 - Selectable CCT

Description

One LED lamp. Three colour temperatures. Drop-in CFL replacement.

The SAL LT Series LT409TC/B22 is a 9W non-dimmable LED tubular lamp with selectable colour temperature (3000K / 4000K / 6000K) and a B22 bayonet cap base — a direct retrofit for existing CFL and incandescent bayonet fittings across Australian homes and light commercial spaces. A small on-lamp switch selects the colour temperature before installation, so one SKU covers warm living areas, cool kitchens, and daylight workshops without stocking three separate products.

• Power: 9W, 240V AC, 50Hz
• Lumens: 850 lm (3000K) / 900 lm (4000K) / 850 lm (6000K)
• CCT: Selectable 3000K / 4000K / 6000K via on-lamp switch
• CRI: 80
• Beam Angle: 200°
• Base: B22 bayonet cap
• Dimensions: 40mm diameter x 105mm length
• Dimmable: No (see LT409TCD/B22 for dimmable variant)
• Construction: Opal polycarbonate diffuser, poly-covered aluminium body, double insulated
• Pack size: Sold individually; available in SAL cartons of 10

Important: Always switch the supply OFF before changing the CCT setting — changing the setting under live power may damage the integral driver.

Fast shipping across Australia — order online now for quick dispatch.

The Smarter CFL Retrofit for Australian Homes and Trade

Australia's existing housing stock runs on B22 bayonet fittings — table lamps, pendants, ceiling roses, and older downlight tracks built around the same cap that's been standard here for decades. The LT409TC/B22 drops straight into all of them. No rewiring, no new fixture, no electrician required for a simple lamp swap. At 9W it replaces a typical 60–75W incandescent or 13–18W CFL with similar light output — roughly 80% less power draw than incandescent and around 40% less than an equivalent CFL.

Three colour temperatures, one part number — commit on site.

The on-lamp CCT switch gives three options: 3000K Warm White for living areas, dining rooms, bedrooms, and table lamps where a soft, traditional-incandescent feel is wanted; 4000K Cool White for kitchens, bathrooms, hallways, and home offices; and 6000K Daylight for garages, workshops, walk-in robes, and task areas where maximum visibility matters. Set the CCT before fitting the lamp, with the supply switched off. The 200° beam angle mimics a traditional incandescent globe's omnidirectional spread — working well inside lampshades and open pendant fittings where a narrow spotlight beam would leave dark patches.

Built to last — and safer than CFL at end of life.

The poly-covered aluminium body acts as a heat-sink, extending LED chip life well beyond cheap glass-bodied alternatives. The opal polycarbonate diffuser softens light output, eliminates hotspots, and is shatter-resistant — an advantage over glass-globe alternatives in high-traffic or commercial spaces. Unlike CFLs, this lamp contains no mercury, so it's not classified as hazardous waste and can be recycled through standard e-waste channels at most council collection points and major hardware retailers.

Q: Will the LT409TC/B22 fit my existing CFL fitting?
A: If your fitting has a B22 bayonet base (two opposing pins that twist into the socket — the most common Australian residential lamp base), yes. The lamp's 40mm diameter and 105mm length is similar to a typical CFL spiral and will fit most lampshades, pendants, and open-shaded fittings. For very compact or shallow fittings, measure the available internal height before ordering.

Q: Is the LT409TC/B22 dimmable?
A: No. The LT409TC/B22 has a non-dimmable integral driver. Installing it on a dimmer circuit may cause flicker, buzzing, or premature lamp failure. For dimming applications, use the SAL LT409TCD/B22 dimmable sibling model with a compatible trailing-edge LED dimmer.

Q: What is the difference between the B22 and E27 versions?
A: Both are SAL LT Series 9W selectable-CCT LED tubular lamps with the same light output, CRI, and beam angle. The B22 (this product) suits the bayonet base dominant in Australian homes. The LT409TC/E27 (sold separately) suits Edison screw fittings common in newer European-style fixtures and many imported lamps. Choose based on the base type of your existing fitting.