RCL35 35mm Tinned Copper Compression Crimp Link

Description

35mm. Tinned Copper. Compression Crimp Link. Sold Individually.

The RCL35 is a 35mm tinned copper compression crimp link — used to join two 35mm² conductor ends together in a permanent, low-resistance crimp connection. Annealed copper body with tin electroplated finish. 56mm overall length, 8.4mm inside diameter. Single crimp. Sold individually.

• RCL35 — 35mm Tinned Copper Compression Crimp Link
• Suits 35mm² conductor — 7/2.52 stranding
• Annealed copper body — tin electroplated finish for corrosion resistance
• Inside diameter: 8.4mm
• Overall length: 56mm
• Single crimp — crimping die K20
• For joining two conductor ends in a permanent compression crimp joint
• Sold individually

Shop online now — fast dispatch Australia-wide.

Where the RCL35 Crimp Link Is Used

A compression crimp link joins two conductor ends together — the conductors are inserted from each end of the link body and a compression crimp tool closes the barrel around both conductors, making a permanent, mechanically secure, low-resistance electrical joint. The crimp link is the correct method for extending a conductor run, jointing cables in a junction box or enclosure, or connecting two cable ends where a screw terminal or connector block is not appropriate or practical.

The RCL35 is sized for 35mm² conductor — a large cable size used in Australian commercial and industrial electrical installations for high-current sub-main feeds, main switchboard incoming cables, large three-phase motor circuits, and heavy current distribution runs where 25mm² conductors are insufficient for the current demand. At 35mm², the conductor is firmly in commercial and industrial territory — single-core or multi-core cables used for main distribution, large motor circuits, and heavy current sub-mains. The tinned copper construction combines the excellent conductivity of annealed copper with a tin electroplated surface that resists oxidation and maintains a clean, low-resistance contact surface over the life of the joint. The single crimp is applied with a K20 crimping die using a standard compression crimp tool.

Crimp links in the RCL range are available in sizes from 1.5mm² through to 70mm² — covering the full range of common cable conductor sizes used in Australian electrical installations.

Q: What is the difference between a crimp link and a crimp lug?
A: A crimp link (RCL35) joins two conductor ends together — it has an open barrel at both ends, one for each conductor. A crimp lug terminates a single conductor to a bolted connection point — it has one barrel end and one lug or ring end. Use a crimp link for conductor-to-conductor joints; use a crimp lug for conductor-to-terminal connections.

Q: What crimping tool and die is required for the RCL35?
A: The RCL35 requires a K20 crimping die with a standard compression crimp tool. Confirm your crimp tool is rated for 35mm² copper conductors before use.

Q: Is the RCL35 sold individually or in a bag?
A: The RCL35 is sold individually.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.