Pro-Vision PVST-COB480100-3000K 24V 480D COB LED Strip Light Single Colour Warm White 3000K 10m Roll IP20

Description

A continuous line of light, one fixed colour.

The Pro-Vision PVST-COB480100 is a 10 metre roll of 24V DC COB LED strip light packing 480 LEDs per metre for a smooth, even line of light. Choose one fixed colour temperature, 3000K, 4000K or 6000K, and pair it with a 24V DC driver.

Key Features

• 10 metre roll, strip only
• 24V DC input
• 12W per metre, 120W for the full roll
• COB LED chips, 480 LEDs per metre
• Single fixed colour: 3000K, 4000K or 6000K
• CRI >83
• 120 degree beam angle
• Cut points every 50mm
• IP20 rated
• Rated lifespan over 50,000 hours
• 3 year replacement warranty

Get yours today with fast dispatch Australia-wide.

Why COB Strip Light Is Worth Choosing

Chip on board, not spaced diodes
COB (chip on board) strip places its LED chips in a tight, continuous row rather than as individual spaced diodes. At 480 LEDs per metre, the PVST-COB480100 is built for an even, uniform line of light along the full run. The 120 degree beam angle spreads that output across the surface in front of the strip.

Picking the right colour temperature
Each variant is a single fixed colour, so the tone you order is the tone you get. There is no controller to set up and no colour adjustment to manage.

• 3000K: warm white
• 4000K: natural white
• 6000K: cool white

A CRI above 83 gives reasonable colour rendering across all three options. If you need adjustable white from one strip, look at a CCT tuneable COB strip instead.

Planning power and length
The strip draws 12W per metre, so a full 10 metre run is a 120W load on the driver. Shorter runs draw proportionally less. Cut points sit every 50mm, which means any cut length should be a multiple of 50mm to keep every section working. The driver is not included, so size a 24V DC driver to suit your total connected load.

Where it can be installed
IP20 offers no protection against water. Keep this strip to dry indoor locations, and choose a strip with a higher IP rating for damp, wet or outdoor areas.

Q: Does the Pro-Vision PVST-COB480100 come with a driver?
A: No. It is supplied as a 10 metre strip only and needs a 24V DC driver to run, sold separately.

Q: How many watts does a 10 metre roll of this COB strip use?
A: It is rated at 12W per metre, so the full 10 metre roll draws 120W. Choose a 24V DC driver rated for at least your connected load.

Q: Can this COB LED strip be used outdoors?
A: No. It is rated IP20, which gives no protection against water, so it is suited to dry indoor locations only.