Pro-Vision 24V RGBW IC COB Magic Strip Light 10m IP20 + RF Remote

Description

Addressable RGBW COB strip with chasing colour effects.

The Pro-Vision 24V RGBW IC COB Magic Strip Light is a 10 metre roll of addressable COB LED tape with a built-in IC, giving individually controllable diodes for dynamic chasing, rainbow and flow effects as well as static colour. Supplied with an RF remote controller, it produces a smooth, dot-free line of colour thanks to the continuous COB layout, and runs on safe 24V DC. It is fully dimmable, IP20 rated and cuttable every 100mm.

Key Features

• 10 metre roll – single continuous run
• Addressable RGBW with built-in IC (Magic / dream colour)
• COB (Chip on Board) – smooth dot-free colour output
• 420 LEDs per metre
• Dynamic chasing, rainbow and flow effects plus static colour
• RF remote controller included
• Fully dimmable
• 24V DC low voltage operation
• 10W per metre power draw
• High Ra >90 colour rendering
• 180 degree beam angle
• 10mm PCB width
• Cuttable every 100mm
• IP20 rated for indoor use
• Rated lifespan over 50,000 hours
• 3 year warranty

Add to cart for fast dispatch across Australia.

Addressable Magic Colour

Unlike standard RGB strips where the whole run shows one colour at a time, this strip has a built-in IC that addresses the diodes individually. That enables dynamic effects such as colour chasing, rainbow flow and gradient transitions, controlled from the included RF remote. It is ideal for feature walls, gaming and entertainment spaces, display lighting and any installation where movement and colour are the point.

Smooth, Dot-Free COB Output

COB (Chip on Board) technology packs 420 diodes per metre under a continuous phosphor coating, so colours blend into a seamless line with no visible dots or gaps between LEDs. This gives a noticeably higher-quality result than older SMD addressable strips, especially in cove lighting and where the strip is viewed directly.

Flexible Installation

The 10mm wide strip runs on safe 24V DC at 10W per metre and can be cut to length every 100mm. The 10 metre length suits larger feature installations, and with an IP20 rating it is designed for dry indoor locations.

Q: What does the IC / addressable feature do?
A: The built-in IC controls each section of the strip individually, allowing dynamic effects like colour chasing, rainbow flow and gradients, not just a single static colour across the whole run.

Q: Does this strip light have visible LED dots?
A: No. It uses COB (Chip on Board) technology with 420 LEDs per metre under a continuous coating, producing a smooth dot-free line of colour.

Q: Does it include a driver or power supply?
A: The kit includes the 10m strip and RF remote controller. It requires a 24V DC driver to operate, available separately.