Pro-Vision 24V COB LED Strip Light Kit CCT 2700K-6500K 10m IP20 + Remote

Description

Tuneable white COB strip light with no visible dots.

The Pro-Vision 24V 576D COB Strip Light Kit is a 10 metre roll of high-density COB LED tape with adjustable colour temperature from warm 2700K to cool 6500K, supplied with an RF remote controller. With 576 LEDs per metre in a continuous COB layout, it produces a smooth, dot-free line of light ideal for cove lighting, under-cabinet and architectural detail. It is fully dimmable, IP20 rated and cuttable every 41.66mm.

Key Features

• 10 metre roll – single continuous run
• COB (Chip on Board) – smooth dot-free light output
• High density 576 LEDs per metre
• Tuneable white 2700K to 6500K (CCT adjustable)
• RF remote controller included (RF17)
• Fully dimmable
• 24V DC low voltage operation
• 10W per metre power draw
• High CRI >90 for accurate colour rendering
• 180 degree beam angle
• 8mm width – fits slim profiles
• Cuttable every 41.66mm
• IP20 rated for indoor use
• Rated lifespan over 50,000 hours
• 3 year warranty

Add to cart for fast dispatch across Australia.

Smooth, Dot-Free COB Lighting

Unlike traditional SMD strip lights where individual LEDs are visible as dots, COB (Chip on Board) technology packs 576 diodes per metre under a continuous phosphor coating. The result is an even, seamless line of light with no spotting, which is especially important in cove lighting, under-shelf runs and anywhere the strip is viewed directly or reflected off a surface.

Adjustable Warm to Cool White

The CCT function lets you tune the light anywhere from a warm 2700K through to a cool 6500K using the included RF remote. This makes a single strip suitable for both relaxed warm ambience and bright, functional task lighting, and the strip is fully dimmable so brightness can be matched to the room.

Flexible Installation

At just 8mm wide the strip fits into slim aluminium profiles and tight channels, and can be cut to length every 41.66mm. Running on safe 24V DC at 10W per metre, the 10 metre length gives a long continuous run for larger installations. With an IP20 rating it is designed for dry indoor locations.

Q: Does this strip light have visible LED dots?
A: No. It uses COB (Chip on Board) technology with 576 LEDs per metre under a continuous coating, producing a smooth dot-free line of light.

Q: Can I adjust the colour and brightness?
A: Yes. The colour temperature is adjustable from 2700K warm white to 6500K cool white, and the strip is fully dimmable, all controlled by the included RF remote.

Q: Where can this strip light be used?
A: It is IP20 rated for indoor dry locations. At 8mm wide it suits slim profiles and can be cut every 41.66mm to fit the installation.