GEN3 CO3PH450 50A 4 Pin 500V Three Phase Switched Socket Outlet IP66

Description

The highest-current three-phase switched socket in the four-pin range.

The GEN3 CO3PH450 is a 50A, 4-pin three-phase switched socket outlet rated 500V and IP66, combining a three-phase socket and an integral isolating switch in a single weatherproof unit. The four round pins carry three phases and earth, and the built-in switch lets the outlet be turned off at the point of use, so three-phase equipment can be isolated without unplugging or switching at the board. At 50A it is the highest-current outlet in this four-pin range, suiting the heaviest three-phase machinery, and its round-pin keying means only the matching three-phase plug can be connected. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it suits outdoor, industrial and wash-down environments where a switched, weatherproof three-phase outlet is needed.

Key Features

• 50A, 4-pin three-phase switched socket outlet, 500V
• Three-phase socket and isolating switch combined in one unit
• Four pins – three phases plus earth
• Switch isolates the outlet at the point of use
• Round pin configuration – keyed three-phase connection
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Series 56 style
• Surface mount
• Combination unit – approximately 206 × 101 × 110mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Australian/NZ approval or compliance certificates held

Add to cart for fast dispatch across Australia.

Three-Phase Socket and Switch in One

The CO3PH450 brings together a 50A three-phase socket and an isolating switch in a single weatherproof housing. The switch allows the three-phase outlet to be turned off locally, providing convenient on-site isolation of connected equipment without needing to unplug or return to the switchboard, a practical safety feature for the heaviest three-phase machinery in exposed locations.

Four Pins: Three Phases Plus Earth

The CO3PH450's four round pins carry three active phases and earth, suiting three-phase equipment that does not require a neutral. The round-pin keying provides a dedicated three-phase connection, so a single-phase or differently configured plug cannot be connected by mistake.

Built for the Outdoors

Rated IP66, the CO3PH450 is dust-tight and withstands high-pressure water jets. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: What does switched mean on the GEN3 CO3PH450?
A: It has a built-in switch that isolates the three-phase socket at the point of use, so connected equipment can be turned off without unplugging or switching at the board.

Q: What is the difference between the CO3PH450 and the CO3PH440?
A: The current rating. The CO3PH450 is 50A and the CO3PH440 is 40A. Both are 4-pin three-phase 500V IP66 switched socket outlets.

Q: Is the CO3PH450 suitable for outdoor use?
A: Yes. It is rated IP66, meaning it is dust-tight and protected against high-pressure water jets, suitable for outdoor and wash-down environments.