GEN3 SCO4P50 50 Amp 4 Pin Round Socket 56 Series Style IP66

Description

High-current three-phase socket, sealed to IP66.

The GEN3 SCO4P50 is a 50A three-phase industrial extension socket with four round pins and an IP66 weatherproof body. With a cable gland for quick termination, it's the rugged female end for building or repairing the heaviest round-pin three-phase 50A leads.

Key Features

• 50A three phase, 4 round pins (three actives, earth)
• 500V AC
• IP66 rated — dust-tight and protected against powerful water jets
• Cable gland for quick termination (rewireable)
• 56 Series-style, interchangeable with other major brands
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Accepts 50A 4-pin round three-phase plugs

Secure one online for fast Australia-wide dispatch.

The Female End of the Lead

The SCO4P50 is the trailing socket that pairs with the GEN3 four-pin 50A plugs to make a complete three-phase extension lead — the straight PLS3PH450 or the angled PLA3PH450. It follows the 56 Series-style format, so it accepts 50A four-pin three-phase round plugs in a rugged IP66 weatherproof housing.

Built for Tough Australian Sites

IP66 protection means it is dust-tight and withstands powerful water jets from any direction. A virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper (for lower heat rise) stand up to vibration, moisture and a wide -25°C to +70°C operating range. It is built to AS/NZS 3123:2005, the Australian standard for industrial plugs and socket-outlets.

Quick to Wire and Replace

A cable gland makes termination fast and secure, so it's a straightforward rewireable replacement socket for a damaged or worn 50A three-phase lead. It is interchangeable with other major brands and pairs with the matching GEN3 four-pin plug and appliance inlet to build or repair a complete lead.

Q: What plug does the GEN3 SCO4P50 accept?
A: It accepts 50A three-phase 4-pin round plugs, including the matching GEN3 PLS3PH450 (straight) and PLA3PH450 (angled), in a rugged IP66 weatherproof housing.

Q: Is the GEN3 SCO4P50 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, and it is built to AS/NZS 3123:2005 for industrial use.

Q: Can the GEN3 SCO4P50 be rewired?
A: Yes. It is a rewireable extension socket with a cable gland for quick, secure termination, and should be wired by a licensed electrician.