GEN3 PLA3PH520 Weatherproof IP66 Angled Plug 20A 3 Phase Orange

Description

Three-phase power, angled and weatherproof.

The GEN3 PLA3PH520 is a 20A three-phase industrial extension plug top with five round pins and a 45-degree angled body. Its IP66-rated, 56 Series-style design and compression gland make it a rugged, quick-to-terminate plug for three-phase outdoor and industrial leads that carry a neutral.

Key Features

• 20A three phase, 5 round pins (three actives, neutral, earth)
• 500V AC
• 45-degree angled plug top
• IP66 rated — dust-tight and protected against powerful water jets
• Compression gland for quick cable termination
• 56 Series-style, interchangeable with other major brands
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Complies with AS/NZS 3123:2005; orange finish

Order online for same-day dispatch, Australia-wide.

Why the 45-Degree Angle

The angled body turns the cable away from the pins and down along the surface, taking strain off the cable entry and keeping leads tidy against a wall, board or machine. It's the practical choice in tight spots or where a straight plug would protrude and snag.

Five-Pin Three-Phase, Built Tough

The five round pins carry three-phase power with a neutral (three actives, neutral and earth) rated to 500V, with a 20A rating for heavier three-phase loads that also need a neutral connection. It is IP66 rated, so it is dust-tight and withstands powerful water jets from any direction, with a virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper for lower heat rise. A wide -25°C to +70°C operating range and AS/NZS 3123:2005 compliance suit it to demanding Australian industrial sites.

Fast, Interchangeable Termination

A compression gland makes cable termination quick and secure on site. Because it follows the 56 Series-style format, the PLA3PH520 mates with 20A five-pin three-phase round sockets and inlets and is interchangeable with other major brands. Pair it with a matching 5-pin 20A extension socket to build a complete three-phase extension lead.

Q: How is the GEN3 PLA3PH520 wired?
A: It is a five-pin three-phase plug — three actives, a neutral and an earth — rated 20A at 500V, for three-phase circuits that require a neutral.

Q: Is the GEN3 PLA3PH520 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, and it is built to AS/NZS 3123:2005 for industrial use.

Q: What socket does the PLA3PH520 plug into?
A: It mates with 20A five-pin three-phase round 56 Series-style sockets and inlets and is interchangeable with other major brands. Add a matching 5-pin 20A extension socket to make a lead.