Tesla TPSC14 14mm Cable Clips 4.0/6mm Twin & Earth — Pack of 250

Description

Tesla TPSC14. 14mm Flat TPS Cable Clips with Hardened Drive Nails. White. Jar of 250.

The Tesla TPSC14 is a 14mm white moulded flat cable clip with a hardened drive nail — designed to fix 4.0mm² and 6mm² flat TPS (Twin and Earth) cable to timber framing, wall studs, and similar substrates. The hardened nail is integral to the clip — no separate fastener required. Sold in a jar of 250 clips.

• Tesla TPSC14 — 14mm Flat TPS Cable Clip
• Suits 4.0mm² and 6mm² flat TPS (Twin and Earth) cable
• Hardened drive nail — integral to clip, no separate fastener needed
• White moulded plastic
• Flat cable clip profile — for flat TPS cable runs
• 250 clips per jar

Buy online now — fast dispatch Australia-wide.

About the Tesla TPSC14 Cable Clip

TPS cable clips are the standard fixing method for running flat Twin and Earth cable along timber framing, wall plates, ceiling joists, and floor bearers in residential and commercial electrical installations. The clip's saddle profile holds the flat cable firmly against the substrate while the drive nail — hardened for reliable hammer installation — fixes through the clip base into the timber in a single action. The Tesla TPSC14 is the largest clip in the TPSC range, sized for 4.0mm² and 6mm² T&E cable — the heavier cable sizes used for high-current circuits such as stove, oven, air conditioning, and sub-main circuits in residential and commercial buildings.

The 14mm clip size is matched to the wider outer profile of 4.0mm² and 6mm² flat TPS cable. These larger cable sizes are stiffer and heavier than 1.5mm² or 2.5mm² T&E, which means the clips need to be sized correctly to hold the cable firmly against the framing without slipping or tilting. The TPSC14's 14mm saddle accommodates both 4mm² and 6mm² T&E within the same clip size — covering the two most common heavy-duty flat TPS cable sizes in the one product.

The Tesla TPSC range covers three clip sizes: 10mm for 1.5mm² T&E (TPSC10), 12mm for 2.5mm² T&E (TPSC12), and 14mm for 4.0mm² and 6mm² T&E (TPSC14). The TPSC14 is sold in jars of 250 — reflecting the lower clip-per-metre frequency typical of heavier cable installations compared to lighter lighting circuit cable runs.

Q: Does the TPSC14 suit both 4mm² and 6mm² T&E cable?
A: Yes — the 14mm saddle accommodates both 4.0mm² and 6mm² flat TPS Twin and Earth cable. Both cable sizes have a similar outer width profile that fits within the 14mm clip.

Q: Why are there only 250 clips in the TPSC14 jar compared to 500 in the TPSC10 and TPSC12?
A: Heavier cable sizes (4mm² and 6mm²) are typically used on high-current circuits — stoves, air conditioning, sub-mains — which tend to be shorter runs than lighting or power circuits. Fewer clips are required per installation, so the 250-clip jar is the standard pack size for this clip size.

Q: How are the clips installed?
A: Each clip has an integral hardened drive nail. Place the clip over the cable against the substrate and drive the nail with a hammer — fixing both clip and cable in one action. No pre-drilling or separate fastener is required for standard timber substrates.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.