Transco EPT Rewireable 2 Pin Polarised Plug Top 10A 32V

Description

2 Pin. 32V. Polarised. Rewireable. Low Voltage Lead Assembly.

The Transco EPT is a rewireable 2 pin polarised plug top rated at 10A and 32V — the low voltage plug for assembling or repairing 32V DC extension leads and low voltage wiring applications. Two polarised pins in a clear polycarbonate housing with screwing copper ferrule terminals. Accommodates 1mm x 2 cable. Supplied unassembled — wired by the installer. Sold individually.

• Transco — rewireable 2 pin polarised plug top, 32V
• Clear polycarbonate housing
• Rated 10A at 32V AC
• 2 pin polarised configuration — active and neutral
• Polarised — pins are different sizes to prevent incorrect insertion
• Screwing copper ferrule terminals
• Cable accommodation: 1mm x 2
• Rewireable — supplied unassembled
• Current type: AC

Order online now for fast dispatch Australia-wide.

Where the EPT 32V Polarised Plug Fits

The EPT is a specialist low voltage plug for 32V applications — a voltage level used across a range of specific industrial, marine, and low voltage electrical applications where the standard 240V AC plug format is not appropriate and a 32V rated connection is required. The 2 pin polarised format ensures the plug can only be inserted in the correct orientation, preventing incorrect polarity connection in low voltage circuits where polarity matters. The clear housing allows wiring connections to be verified visually after assembly.

The 1mm x 2 cable accommodation covers the 2-conductor flexible cable used in low voltage lead assemblies. The screwing copper ferrule terminals provide a secure mechanical connection inside the plug body. The rewireable format means the EPT is supplied as an unassembled component and is wired to the cable by the installer — the correct format for custom low voltage lead fabrication and repair applications where a pre-wired plug is not the right solution.

The EPT is a specialised product for specific 32V low voltage applications — it is not suitable for 240V AC mains applications. Confirm the voltage and current requirements of the installation before specifying. The companion socket for the EPT is the SSF/P 32V polarised surface socket. Sold individually.

Q: What is the EPT used for?
A: The EPT is a 2 pin polarised rewireable plug top rated at 10A and 32V — used for assembling or repairing leads and connections in 32V low voltage electrical applications. It is not suitable for standard 240V AC mains applications. Typical uses include specific industrial, marine, and low voltage equipment connections where a 32V rated polarised plug is required.

Q: What does polarised mean on a 2 pin plug?
A: A polarised plug has two pins of different sizes, shapes, or positions so it can only be inserted into the matching socket in the correct orientation. This prevents incorrect polarity connection — important in low voltage DC and polarised AC circuits where reversing the active and neutral conductors could damage equipment or create a fault.

Q: Is the Transco EPT supplied pre-wired?
A: No. The EPT is supplied unassembled and must be wired to the cable by the installer. The screwing copper ferrule terminals accept 1mm x 2 flexible cable. This rewireable format is the correct specification for custom low voltage lead assembly and plug repair applications.