GEN3 PLS3PH440 40 Amp 4 Pin Round Plug Top 56 Series Style IP66

Description

High-current three-phase, straight and weatherproof.

The GEN3 PLS3PH440 is a 40A three-phase industrial extension plug top with four round pins and a straight body. It ships with an oversize gland for larger cables, and its IP66-rated, 56 Series-style design makes it a rugged plug for high-current three-phase outdoor and industrial leads.

Key Features

• 40A three phase, 4 round pins (three actives, earth)
• 500V AC
• Straight plug top
• Oversize gland included for larger cables (18–25mm diameter)
• IP66 rated — dust-tight and protected against powerful water jets
• 56 Series-style, interchangeable with other major brands
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Complies with AS/NZS 3123:2005; orange finish

Order yours online for fast Australia-wide delivery.

Straight, Round-Pin Connection

The PLS3PH440 is the straight, in-line version of the four-pin 40A plug, sending the cable straight out the back. It's the simple choice where a straight lead exit suits the installation. For tight spots or surface runs where the cable needs to turn away, the angled PLA3PH440 is the alternative.

High-Current Three-Phase, Built Tough

The four round pins carry three-phase power (three actives plus earth) rated to 500V, with a 40A rating for higher-draw three-phase equipment. To match the heavier conductors a 40A circuit needs, it includes an oversize gland sized for 18–25mm cable. It is IP66 rated, so it is dust-tight and withstands powerful water jets from any direction, with a virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper. A wide -25°C to +70°C operating range and AS/NZS 3123:2005 compliance suit it to demanding Australian industrial sites.

Fast, Interchangeable Termination

The oversize compression gland makes cable termination quick and secure on site, even with larger cable. Because it follows the 56 Series-style format, the PLS3PH440 mates with 40A four-pin three-phase round sockets and inlets and is interchangeable with other major brands. Pair it with a matching 4-pin 40A extension socket to build a complete three-phase extension lead.

Q: Is the GEN3 PLS3PH440 single or three phase?
A: It is three phase. The four round pins carry three actives plus earth, rated 40A at 500V.

Q: What size cable fits the GEN3 PLS3PH440?
A: It includes an oversize gland sized for larger cables of 18 to 25mm outer diameter, suited to the heavier conductors a 40A three-phase circuit requires.

Q: Is the GEN3 PLS3PH440 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, and it is built to AS/NZS 3123:2005 for industrial use.